Select your vehicle
-13%

Rubicon Express Leaf Spring Standard Front/Rear 5-Leaf YJ 2.5 Inch – RE1430

Rubicon Express

  • Fits the 1987–1995 Jeep Wrangler (YJ)
  • 2.5-inch standard leaf spring
  • Five leaves, usable front or rear
  • Lift height range 0 to 4.99 inches
  • Part number RE1430

Purchase through Amazon

Orders are placed, shipped and supported through Amazon, with Amazon’s checkout, delivery options and return policy.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

Description

Overview

The Rubicon Express RE1430 is a 2.5-inch standard leaf spring with five leaves for the 1987–1995 Jeep Wrangler (YJ). The five-leaf pack can be used at the front or the rear.

The spring is a single unit with a lift height range of 0 to 4.99 inches. Bushings are not included, so plan for them separately.

Key features

  • Five-leaf spring pack
  • Usable front or rear
  • 2.5-inch standard lift
  • Lift height range of 0 to 4.99 inches
  • It shares features with Rubicon Express Extreme-Duty leaf springs.

Leaf spring setup

A leaf spring controls axle location and carries much of the vehicle’s weight, so the spring pack, shackles and bushings work as one system. When a spring is replaced, check the spring perch, the center bolt and the U-bolts for wear. Replacing a spring without inspecting these parts can leave the axle out of position.

Lift height affects how the axle sits under the frame and the angle of the driveline. After installation, check the pinion angle and the driveshaft joints, especially at the upper end of the lift range. Shackle and bushing wear increases with the extra load a lift places on the springs.

Retighten the U-bolts after the first few drives, since the new spring pack settles and the nuts can loosen.

  • Inspect perches, center bolt and U-bolts
  • Check pinion angle after lifting
  • Retighten U-bolts after early drives

Specifications

Brand Rubicon Express
Part number RE1430
UPC 614901438239
Lift 2.5 inches, standard
Lift height range 0 to 4.99 inches
Leaves 5
Position Front or rear
Spring quantity Single spring
Bushings Not included

Vehicle fitment

It fits the 1987–1995 Jeep Wrangler (YJ), covering all YJ models.

It is made for the YJ chassis. Confirm your vehicle’s year, model and trim before ordering, especially when comparing against TJ, LJ or later Wranglers.

Installation notes

Bushings are not included, so the existing bushings or separately sourced replacements will be needed when the spring is installed.

What’s included

One five-leaf spring pack per unit. Bushings are not included.

SKU: R/ERE1430 Category:

Specification

Shipping weight 36.00 lbs
Package dimensions 45.30 × 10.90 × 4.00 in
brands

Fitment

VehicleYearsTrims
Jeep Wrangler (YJ) likely fits1987–1995All

Vehicles marked "likely fits" are inferred from the product description rather than a manufacturer fitment list. Please confirm fitment with the manufacturer before ordering.

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the Rubicon Express RE1430 fit a 1987–1995 Jeep Wrangler YJ?

Yes. It is made for the 1987–1995 Jeep Wrangler (YJ). Confirm your chassis code before ordering, especially if the vehicle is a TJ or LJ.

Can the Rubicon Express RE1430 be used at the front or the rear?

Yes. The five-leaf spring pack can be used at the front or the rear, with one spring per unit. Its lift height range is 0 to 4.99 inches.

Are bushings included with the Rubicon Express RE1430?

No. Bushings are not included, so the existing bushings or separately sourced bushings are needed when you install the spring.

Do leaf springs need a check after installation?

Yes. Check the U-bolt torque and shackle movement after the first few drives. Look for uneven ride height or a shifted axle, since those signs point to a loose mount or a bushing that needs attention.