Select your vehicle
-13%

Rubicon Express Extreme Duty Steering Stabilizer – RXT2001B

Rubicon Express

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Single 1.625-inch piston steering stabilizer for direct bolt-on installation
  • Fits JL Wranglers from 2018 to 2026 and JT Gladiators from 2020 to 2026.
  • 11/16-inch chrome shaft and oversized shock body
  • Brackets and shock boot not included

Description

Overview

The Rubicon Express R/ERXT2001B is a single extreme duty steering stabilizer for the 2018 to 2026 Jeep Wrangler JL and the 2020 to 2026 Jeep Gladiator JT. It installs directly on the front of the vehicle and is part of the Twintube series.

The stabilizer has a 1.625-inch piston for control and an 11/16-inch chrome shaft for strength. The oversized shock body holds more fluid, and double welded rings add durability on and off road.

Key features

  • 1.625-inch piston for control
  • 11/16-inch chrome shaft
  • Oversized shock body with added fluid capacity
  • Double welded rings for durability
  • Direct bolt-on installation
  • Black finish

Choosing the right setup

A single steering stabilizer is a common choice for stock-width steering and moderate tire sizes, where one damper on the track bar or steering linkage is enough to calm the front end. Piston size and shaft strength affect how the unit handles impacts, so the larger piston and thicker shaft suit owners who run rough trails regularly. Confirm the mounting points and clearance before buying, since the stabilizer has to sit clear of the frame and steering arms through full travel.

Stabilizers work alongside tie rods, drag links and track bar bushings. A worn joint lets the front axle move more than the damper can control, so inspect those parts when the stabilizer is replaced. Keep the eyelet bushings greased where fitted, and look for fluid seepage past the shaft seal as a sign the unit needs attention.

Specifications

Brand Rubicon Express
Part number R/ERXT2001B
Series Twintube
Type Single stabilizer
Position Front
Piston diameter 1.625 in
Shaft diameter 11/16 in chrome
Color Black
Brackets Not included
Shock boot Not included

Vehicle fitment

It fits the 2020 to 2026 Jeep Gladiator (JT) and the 2018 to 2026 Jeep Wrangler (JL).

It does not fit the Wrangler JK or the earlier TJ and LJ generations. Confirm fit for your vehicle’s year, model and trim before ordering.

Installation notes

It is a direct bolt-on installation. Brackets are not included, so check that the mounting points on your vehicle match the stabilizer before ordering.

What’s included

One single steering stabilizer under part number R/ERXT2001B.

Not included: brackets and the shock boot.

Fitment

VehicleYearsTrims
Jeep Gladiator2020–202680th Anniversary, High Altitude, Launch Edition, Mojave, Overland, Rubicon, Sport, Sport S, Willys, Willys Sport
Jeep Wrangler (JL)2018–2026Rubicon (2-Door), Sport (2-Door), Sport S (2-Door), Unlimited Moab (4-Door), Unlimited Rubicon (4-Door), Unlimited Sahara (4-Door), Unlimited Sport (4-Door), Unlimited Sport S (4-Door)

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does this stabilizer need brackets?

Yes. Brackets are not included, so they must be bought separately or already be fitted to the vehicle. The stabilizer installs directly with no bracket kit in the box.

Is the shock boot included?

No. The shock boot is not included with the R/ERXT2001B. Plan to source one separately if your installation calls for it.

Will the R/ERXT2001B fit a Gladiator?

Yes. It fits the 2020 to 2026 Jeep Gladiator JT, and it also fits the 2018 to 2026 Wrangler JL.

How can I tell when this stabilizer needs replacing?

Look for fluid leaking past the shaft seal, dents or bends on the body or shaft, and worn eyelet bushings. Steering that rattles or stays wobbly after a bump can also point to a worn unit.

Can it be serviced together with other front steering parts?

Yes. Stabilizers are often serviced alongside tie rod ends, drag links and track bar bushings. Replacing worn joints at the same time keeps the steering geometry consistent and lets the stabilizer work as intended.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon