Overview
The Currie CE-9112LJN is a 3/4-16 left hand thread jam nut, part number CE-9112LJN, intended for Currie CE-9112SPL Johnny Joints with treaded shanks. Its finish is silver zinc plated. Like other jam nuts, it locks a threaded adjustment in place, and it can serve any other job that needs a left hand 3/4 inch jam nut.
Key features
- Left hand thread in 3/4 inch -16 size
- Built for Currie CE-9112SPL Johnny Joints with treaded shanks
- Silver zinc plated finish
- Suitable for other left hand 3/4 inch applications
Locking a threaded adjustment
A jam nut locks a threaded rod end or joint at the length you set. Start by threading the nut onto the shank by hand, then bring it snug against the joint body. Hold the rod end still while you tighten the nut, so the adjustment does not turn and change length. A clean, undamaged thread lets the nut seat evenly and keeps the lock reliable.
Because this nut is left hand, it turns counterclockwise to tighten. Mark the setting on the shank before you lock it so you can compare the length again later. Check the nut periodically for looseness, especially on rough terrain, and re-lock it after any adjustment. If the threads show galling or the nut will not run down smoothly, replace it rather than forcing it.
Specifications
| Brand | Currie |
|---|---|
| Part number | CE-9112LJN |
| UPC | 70000445213 |
| Thread size | 3/4 inch – 16 |
| Thread direction | Left hand |
| Finish | Silver zinc plated |
| Fitment | Universal fit |
Vehicle fitment
No vehicle is tied to this left hand nut, and it carries a universal fit designation. Match its left hand 3/4-16 thread to the joint or rod end you are using.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A left hand nut tightens in the opposite direction from a standard nut, so confirm the joint shank is left hand before fitting it.
What’s included
One 3/4-16 left hand jam nut, silver zinc plated.
Not included: the Currie CE-9112SPL Johnny Joint.







