Overview
The Rubicon Express jam nut, part number HW3065, is a zinc plated nut with a 3/4 inch – 16 thread and right hand thread direction. The zinc plating provides corrosion resistance.
Key features
- Zinc plated for corrosion resistance
- 3/4 inch – 16 thread size
- Right hand thread
- It is a universal fit.
Using jam nuts correctly
A jam nut is tightened against a standard nut to keep the standard nut from backing off under vibration. For the lock to work, both nuts must be tightened against each other with the threads fully engaged. The nut should be held in place while the top nut is torqued, so the threads do not twist or bind.
Zinc plating protects the steel from moisture, but it wears where threads rub and where the nut is repeatedly removed. Inspect the threads on both the nut and the mating part before reuse, and replace any nut that shows damage, galling or rust under the plating.
- Hold the lower nut while torquing the upper nut
- Clean threads before assembly
- Replace nuts that show galling or damage
- Keep the threads free of heavy grease unless the application calls for it
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | HW3065 |
| UPC | 614901434576 |
| Product type | Jam nut |
| Thread size | 3/4 inch – 16 |
| Thread direction | Right hand |
| Finish | Zinc plated |
| Fitment listing | Universal fit |
Vehicle fitment
It is a fastener that is not tied to a specific vehicle, so confirm the thread matches the part you plan to lock.
Check that the 3/4 inch – 16 right hand thread matches the part you plan to lock.
Installation notes
Thread the nut onto a matching right hand 3/4 inch – 16 thread and tighten it to the torque value for the application.






