Overview
The Rock Krawler RK02985 is a 1-5/16 right hand jam nut, part number RK02985, positioned as a replacement service part for existing suspension hardware. Check your current nut carefully before ordering, since no dimensions are given to compare against.
Key features
- 1-5/16 thread size, right hand
- Replacement service part for existing hardware
- Universal fit, with no vehicle named
- Rock Krawler Suspensions product line
Checking thread before fitting
A jam nut locks a threaded rod end, adjuster or sleeve in position by clamping against it. It works best when the thread is clean and fully engaged, because a nut that sits on a damaged or dirty thread can strip or back off under repeated bumps. Before fitting any nut, run a thread chaser over the rod and wipe away dirt, grit and old thread locker.
Off-road use puts constant vibration and shock loads on these fasteners, so look for signs of wear each time the suspension is serviced. Rounded flats, cracks at the root of the thread, rust packed into the threads and a nut that turns with little resistance all point to replacement. Tighten the nut against the adjuster while holding the rod in place, and recheck the setting after the first drives.
- Clean threads before assembly
- Replace nuts with rounded flats or cracks
- Recheck alignment after the first few drives
Specifications
| Brand | Rock Krawler |
|---|---|
| Part number | RK02985 |
| UPC | 700007719351 |
| Thread size | 1-5/16 |
| Thread direction | Right hand |
| Fitment | Universal fit |
Vehicle fitment
Fitment depends on whether the thread and your existing hardware match. No make, model or year is named, so the universal fit designation is the only guide given.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Compare the thread size and direction of the existing nut with the 1-5/16 right hand specification before fitting the replacement.
What’s included
One 1-5/16 right hand jam nut.








