Overview
The Rock Hard 4×4 Parts Fuel Tank Skid Plate, part number RH-6001, is a fuel tank skid made from 3/16-inch steel plate. It is laser cut and CNC bent to fit, and it bolts underneath the tank. The factory shield stays in place during installation.
The skid uses the factory bolts, plus one additional bolt on 2-door models and three additional bolts on 4-door models. Drilling is required for the 3/8-inch bolts. It is made for both 2-door and 4-door body styles, so confirm your body style before ordering.
Key features
- 3/16-inch steel plate, laser cut and CNC bent
- Bolts underneath the tank
- Factory shield stays in place
- Uses factory bolts with added bolts for each body style
- Black powder coat finish
- Made in the USA
Bolt-on fuel tank guards
A bolt-on fuel tank guard sits under the tank, where it can meet rocks, ridges and stumps on rough terrain. Guards like this are usually designed to leave the factory shield in place, which keeps the original protection working alongside the new plate. Because the tank holds fuel, a secure, well-fitted guard is a sensible upgrade for drivers who spend time off road.
The number of mounting points affects how the guard carries load, so confirm the hardware count and bolt pattern before starting. Added bolts need clean holes and firm tightening, so keep drill bits sharp and deburr the holes before installing. After the first few trail outings, check the bolts, look over the tank straps, and inspect the powder coat for chips where rock contact is likely. Fuel lines and the filler neck should be checked for rubbing too.
- Keep drill bits sharp for clean bolt holes
- Deburr holes before fitting the bolts
- Recheck bolts after the first trail runs
- Look for fuel line rub near the guard edges
Specifications
| Brand | Rock Hard 4×4 Parts |
|---|---|
| Part number | RH-6001 |
| UPC | 70000444075 |
| Position | Fuel tank |
| Material | 3/16-inch steel plate |
| Finish | Black powder coat |
| Added bolts | One on 2-door, three on 4-door |
| Bolt holes | Drilled for 3/8-inch bolts |
| Installation | Cutting or drilling required |
Vehicle fitment
The skid is made for 2-door and 4-door models. Confirm the body style and generation of your Jeep before ordering, since the number of added bolts depends on it.
Confirm the body style and generation of your Jeep before ordering, since the number of added bolts depends on it. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation requires cutting or drilling. The skid uses the factory bolts plus the additional bolts for your body style, and the 3/8-inch bolt holes need drilling.
What’s included
The fuel tank skid plate. Check the package contents, including the additional bolts, against your installation before starting.












