Overview
The Pro Comp 51095B is a rear suspension lift kit with a 3.5 to 5.5 inch rear lift. It is tapered to improve the driveshaft angle, and the kit includes front and rear ES3000 shocks, torsion crossmember brackets, a sway bar link, hardware and a brake line hose kit.
Other parts are required for a complete kit, so it is not a finished package on its own. The kit is not for use on a front axle made of cast iron.
Key features
- 3.5 to 5.5 inch rear lift
- Tapered design to improve driveshaft angle
- Front and rear ES3000 shocks
- Torsion crossmember brackets
- Sway bar link and brake line hose kit
- Hardware included
Driveline and brake line checks
A rear lift changes the angle between the transmission and the pinion, so driveline vibration is one of the first things to check after an install. A tapered design helps, but vibration at highway speed can still show up if the angles are off. Measure the angles with the truck at ride height rather than on the jack.
Brake lines and the ABS sensor wire are routed close to the axle and springs, and extra rear height can stretch them. Check hose length through the full suspension travel and make sure nothing rubs. Sway bar links and their bushings should also be inspected for play.
Shocks and the crossmember brackets carry more load at a higher ride height, so re-torque hardware after the first drives and inspect for elongated holes or cracked brackets.
- Driveline angles measured at ride height
- Brake hose length checked through full travel
- Sway bar links inspected for play
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 51095B |
| UPC | 614901108958 |
| Rear lift | 3.5 to 5.5 inch |
| Shocks | ES3000 front and rear |
| Color | Black |
| Front axle | Not for a front axle made of cast iron |
Vehicle fitment
Confirm the year, model and trim of your vehicle before ordering, and confirm the front axle is not cast iron.
Confirm your vehicle’s year, model and trim before ordering, and confirm the front axle is not cast iron.
Installation notes
Because the kit is tapered to improve the driveshaft angle, check the driveline angles after installation and confirm the brake lines have enough length at the new rear height.
What’s included
The kit includes the rear suspension lift components, front and rear ES3000 shocks, torsion crossmember brackets, a sway bar link, hardware, and a brake line hose kit.
Not included: the other parts required for a complete kit.









