Overview
The Pro Comp K2200B is a 6-inch stage 2 radius arm lift kit with front and rear ES9000 shocks. It fits 2014–2018 Ram 2500 pickups, including Big Horn, Laramie, Lone Star, SLT and Tradesman trims.
At the front, the kit uses coil springs and radius arms. At the rear, coil spring spacers are used. A drop track bar bracket is included, and the shocks are supplied at both ends.
Key features
- 6-inch lift, stage 2
- Front and rear ES9000 shocks in black
- Front coil springs and radius arms
- Rear coil spring spacers
- Drop track bar bracket included
Choosing a lift height
Radius arm kits relocate the front axle’s control points, which changes how the axle moves over bumps and under braking. Once the front is raised, the drive angles and steering geometry shift, so an alignment after installation is the usual next step. Tire size should be considered at the same time, since a taller setup changes clearance at full steering lock.
Many owners also replace the track bar and brake lines during a lift like this, because the stock parts were sized for the original height. With the truck safely supported, inspect the sway bar end links, control arm bushings and ball joints, and replace any that show play or cracking.
- Re-torque fasteners after the first few highway and trail runs
- Check brake hose length at full suspension droop
- Inspect shock mounts for wear at each oil change
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K2200B |
| UPC | 700008182701 |
| Lift | 6 inches, stage 2 |
| Front shocks | ES9000 |
| Rear shocks | ES9000 |
| Finish | Black |
| Front lift | Coil springs with radius arms |
| Rear lift | Coil spring spacers |
Vehicle fitment
It fits 2014–2018 Ram 2500 pickups in the Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, Outdoorsman, SLT and Tradesman configurations. Ram 1500 and Ram 3500 trucks are not covered by this kit.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Radius arms change the front axle location, so the caster and alignment need to be set after the kit is installed. The drop track bar bracket should be checked against the track bar position once the front is at its new height.
What’s included
The kit includes front and rear ES9000 shocks, front coil springs with radius arms, rear coil spring spacers and a drop track bar bracket.









