Overview
The Pro Comp PXA5160-893650 is an 18×9 aluminum wheel from the Pro Comp 60 Series Hammer, with a satin black milled finish and a 6 on 135 bolt pattern. It is a windowed-style alloy wheel, sold as a single unit.
The Hammer is cast with low-pressure casting, and the alloy line is rated from 2500 to 3650 lbs per wheel. This wheel has a center bore of 87, an offset of 0 and a backspacing of 5. Match the 6 on 135 bolt pattern first, then the center bore.
Key features
- Low-pressure cast aluminum construction
- 18-inch diameter, 9-inch width
- 6 on 135 bolt pattern
- Center bore of 87
- Zero offset with 5 backspacing
- Satin black milled finish
Six-lug hubs and fitment
A six-lug wheel depends on exact hole spacing. Six holes on a 135 circle will seat only on a hub with the same layout. Even when the lug count matches, a different spacing will not line up, and forcing the wheel can damage the studs. Measure across the lug holes and the hub studs before buying, since the difference can be small.
The 87 center bore must seat on the hub pilot so the wheel runs true. If the bore is larger, a hub-centric ring can help, but it does not correct a wrong bolt pattern. Tighten the lug nuts in a star pattern, and recheck torque after the first few miles because lug seats can settle.
- Count the lug holes and measure across the bolt circle
- Check lug thread size and seat type
- Verify the center bore against the hub pilot
- Test fit before final torque
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA5160-893650 |
| Series | 60 Series Hammer |
| Style | Windowed |
| Construction | Aluminum |
| Finish | Satin black milled |
| Diameter | 18 inches |
| Width | 9 inches |
| Bolt pattern | 6 on 135 |
| Center bore | 87 |
| Offset | 0 |
| Backspacing | 5 |
| Load rating | 2500 to 3650 lbs per wheel (Pro Comp alloy range) |
Vehicle fitment
No vehicle is named for this wheel. The 6 on 135 pattern is a specific layout used on some trucks and SUVs, and the center bore of 87 must match the hub, so the vehicle has to be confirmed before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Only a 6-lug hub at 135 accepts this wheel. A test fit with the tire helps confirm clearance at the caliper, since the zero offset and 5 backspacing set the tire position. Six lug holes have to line up exactly with the hub, so a 6 on 135 wheel will not fit a 6 on 5.5 hub.
What’s included
One 18×9 aluminum wheel. A center cap and lug nuts are not part of the package.











