Overview
The Pro Comp 46 Series Prodigy wheel, part number PXA7046-29583, is a 20-inch by 9.5-inch aluminum spoke wheel in satin black. It has a 6-on-5.5 bolt pattern, a 108 center bore, an offset of -6 and a backspacing of 5.
Pro Comp builds these alloys with low-pressure casting for strength and a stylish look at a good value. The wheels use a high offset for brake clearance on sport utility vehicles and performance trucks, and offset is worth checking on any wheel for a lifted vehicle.
Offset and backspacing decide how far the wheel face sits from the hub mounting surface and how much room it has to the brake caliper, suspension and fender. The 46 Series pairs its satin black finish with a spoke design for trucks and sport utility vehicles.
Key features
- 20-inch diameter and 9.5-inch width
- Satin black finish
- Aluminum spoke construction
- Low-pressure cast alloy, which Pro Comp cites for strength
- High offset for brake clearance
- 6-on-5.5 bolt pattern with a 108 center bore
Offset and clearance
Offset and backspacing decide how far the wheel sits from the hub mounting surface and how much room the wheel has to the brake caliper, suspension and fender. A -6 offset places the face slightly outboard of the centerline, while a 5 backspacing sets the depth of the wheel behind the mounting surface. Together they determine whether a tire clears a caliper at full steering lock.
A 9.5 inch wide wheel changes how the tire sits compared with a narrower wheel, so measure the old and new offset side by side and compare the tire’s overall width with the fender opening. Spacers can change clearance, but they also change the load on the hub studs and should only be used with hardware rated for them.
- Compare offset and backspacing side by side
- Check caliper clearance at full steering lock
- Measure tire width against fender room
- Replace worn hub studs before adding spacers
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA7046-29583 |
| Series | 46 Series, satin black |
| Diameter | 20 inches |
| Width | 9.5 inches |
| Bolt pattern | 6 on 5.5 |
| Center bore | 108 |
| Offset | -6 |
| Backspacing | 5 |
| Style | Spoke |
| Construction | Aluminum |
| Finish | Satin black |
Vehicle fitment
No vehicle is named for this wheel. Match the bolt pattern, center bore, offset and backspacing to your hub and clearances before ordering.
The 6-on-5.5 bolt pattern and 108 center bore are the key measurements to match. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check that the 6-on-5.5 bolt pattern and the 108 center bore match your hub, and that the -6 offset clears the brakes and fenders at the tire size you plan to run. A -6 offset places the mounting face slightly outboard of the wheel centerline, and the 5 backspacing sets how far the wheel sits inboard, so both matter for brake and fender clearance.
What’s included
One 20-inch by 9.5-inch satin black aluminum wheel.
Not included: Tires.











