Overview
The Pro Comp PXA5162-217047 is a 20×10 aluminum split-spoke wheel from the Pro Comp 62 Series Apex line, in satin black milled with an 8 on 170 bolt pattern. It is sold as one wheel.
Pro Comp built the Apex with low-pressure casting and rates its alloy range from 2500 to 3650 lbs per wheel. This wheel is 10 inches wide with a center bore of 125, an offset of -18 and a backspacing of 4.75.
Key features
- Low-pressure cast aluminum
- Split-spoke design
- 20-inch diameter and 10-inch width
- 8 on 170 bolt pattern
- Center bore of 125
- Offset -18 with 4.75 backspacing
Before you mount tires
Tire choice has a direct effect on how this 10-inch rim performs. A wider tire on a 10-inch rim can bulge slightly beyond the bead seat, and it changes the load path through the wheel. Choose a tire rated for the rim width and confirm that the sidewall will clear the fender at full compression.
The wheel’s satin black milled finish is best kept clean of road salt and mud, which can build up in the milled areas. Rinse the wheel after off-road use and inspect the spokes for cracks around the hub. Any sign of cracking or bent metal means the wheel should be replaced before it carries load again.
- Match tire width to the rim width
- Confirm sidewall clearance at full compression
- Rinse milled areas after muddy use
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA5162-217047 |
| Series | 62 Series Apex |
| Style | Split spoke |
| Construction | Aluminum |
| Finish | Satin black milled |
| Diameter | 20 inches |
| Width | 10 inches |
| Bolt pattern | 8 on 170 |
| Center bore | 125 |
| Offset | -18 |
| Backspacing | 4.75 |
| Load rating | 2500 to 3650 lbs per wheel (Pro Comp alloy range) |
Vehicle fitment
No vehicle is named for this wheel. Universal fit on the specifications does not identify a truck or SUV. The 8 on 170 pattern and 125 center bore are required, and the -18 offset should be checked against the fender and brake caliper.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Eight lug holes at 170 have to line up exactly with the hub. Test-fit the 10-inch rim with the chosen tire to confirm the caliper and suspension have room at full lock. Eight lug holes at 170 cannot be adapted to a 180 or 6.5 hub, so the pattern has to match before ordering. Check the 170 pattern on the vehicle with the offset in mind, since a 10-inch rim changes where the tire sits.
What’s included
One 20×10 aluminum wheel, sold individually.











