Overview
The Pro Comp K3084B is a 4-inch stage 1 coil spring and short arm lift with ES3000 shocks at the front and the rear. Its lift height range is 3 to 4.99 inches, and coil springs are used at both ends.
The front end uses tubular lower control arms, front sway bar links and bump stop extensions. The rear uses coil springs in a short arm layout.
Key features
- 4-inch stage 1 lift
- Tubular lower control arms
- Front coil springs and rear coil springs
- Front sway bar links
- Bump stop extensions
- ES3000 front and rear shocks
Clearance and tire choice
Coil spring lifts raise both ends of the truck, but the height at each corner still depends on the tires, wheel offset and the bump stops. A 33×12.50 tire is a large size, so check clearance at full lock and at full compression before driving on trails. Fender trimming or a wheel with different backspace may be needed on some trucks.
Tubular lower control arms and short arm geometry work as a system. When arms are changed, the alignment should follow, and the sway bar links should be checked for correct length. Bump stop extensions help control travel, but inspect them for cracking after rough runs.
After the first few drives, re-check the shock mount bolts, the arm bolts and the sway bar link ends. Listen for knocks over bumps, which often point to loose hardware rather than a faulty part.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K3084B |
| UPC | 614901123371 |
| Lift | 4 inches, stage 1 |
| Lift height range | 3 to 4.99 inches |
| Suspension type | Coil spring and short arm |
| Front lift | Coil springs |
| Rear lift | Coil springs |
| Front shocks | ES3000 |
| Rear shocks | ES3000 |
| Max tire size | 33×12.50 |
| Wheel size | 15 inches |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. Compare the 15-inch wheel size and 33×12.50 tire size with your truck before buying.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Tubular lower control arms and coil springs change the front and rear heights together, so the alignment and the steering geometry should be checked after installation. Confirm the bump stop extensions clear the frame at full travel.
What’s included
The kit includes front coil springs, rear coil springs, tubular lower control arms, front sway bar links, bump stop extensions and ES3000 front and rear shocks.












