Overview
The Pro Comp K4062B is a 6-inch stage 2 coil spring lift with radius arms and ES3000 front and rear shocks. It fits 1990–1996 Ford Bronco models, with a lift height range of 5 to 6.99 inches.
The front uses coil springs and radius arms, with bump stop extensions and a pitman arm for steering correction. The rear is lifted with add-a-leafs, and extended length brake lines are included. The shock boots are not included.
Key features
- 6-inch stage 2 lift
- Front coil springs with radius arms
- Rear add-a-leaf lift
- Bump stop extensions
- Pitman arm steering correction
- Extended length brake lines
Radius arm bushings and wear
Radius arms locate the front axle and control its fore and aft movement. Their bushings carry constant load, so they are one of the first parts to wear on a raised truck. Worn bushings allow the axle to shift, which changes caster and alignment and can make steering feel vague.
Inspect the bushings and their mounting hardware at each service and after rough trail use. Replacing a worn bushing with the arm still installed is possible on many setups, but the alignment should be reset afterward. Checking the sway bar links at the same time helps keep the front end consistent.
- Look for cracked or split bushing rubber
- Check for play at the axle end of the arm
- Inspect sway bar link ends for looseness
- Reset caster and toe after any bushing change
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K4062B |
| UPC | 614901125092 |
| Lift | 6 inches, stage 2 |
| Lift height range | 5 to 6.99 inches |
| Suspension type | Radius arm |
| Front lift | Coil springs with radius arms |
| Rear lift | Add-a-leafs |
| Steering correction | Pitman arm |
| Front shocks | ES3000 |
| Rear shocks | ES3000 |
| Shock boots | Not included |
Vehicle fitment
It fits 1990–1996 Ford Bronco models.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Radius arms change the front axle location and caster, so the alignment should be set after installation. Check the rear driveline angles once the add-a-leafs are in place.
What’s included
The kit includes front coil springs, radius arms, bump stop extensions, a pitman arm, extended length brake lines, rear add-a-leafs and ES3000 front and rear shocks. Shock boots are not included.









