Overview
The Pro Comp K4059B is a 4-inch stage 1 coil spring lift for the 1990–1996 Ford F-150. The front uses coil springs with radius arm brackets, and the rear uses a block and U-bolt kit. The lift height range is 3 to 4.99 inches.
The kit includes bump stop extensions, a pitman arm for steering correction and extended length brake lines. ES3000 shocks are supplied at the front and the rear, and the shock boots are not included.
Key features
- 4-inch stage 1 lift
- Front coil springs with radius arm brackets
- Rear block and U-bolt lift
- Bump stop extensions
- Pitman arm steering correction
- Extended length brake lines
Front and rear suspension balance
A front coil spring lift paired with a rear block and U-bolt lift changes the balance between the two ends of the truck. The front springs set the height at the steering axis, while the rear block raises the axle through the spring seat. If one end rises more than the other, the truck can sit crooked and the driveline angles shift.
Balancing the suspension is a matter of measuring. Ride height at each corner, the rear axle pinion angle and the front caster all interact, so they should be checked together. Worn rear springs or sagging shocks can hide the true height, which is why condition is part of the inspection.
- Measure ride height at each corner after settling
- Check rear pinion angle against the driveline
- Inspect rear springs for sag or cracked leaves
- Replace worn shock mounts before resetting the alignment
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K4059B |
| UPC | 614901125061 |
| Lift | 4 inches, stage 1 |
| Lift height range | 3 to 4.99 inches |
| Suspension type | Radius arm |
| Front lift | Coil springs |
| Rear lift | Block and U-bolt kit |
| Steering correction | Pitman arm |
| Front shocks | ES3000 |
| Rear shocks | ES3000 |
| Shock boots | Not included |
Vehicle fitment
It fits 1990–1996 Ford F-150 trucks.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A block and U-bolt rear lift with radius arm brackets changes the front and rear geometry, so the alignment and driveline angles should be checked once the kit is installed. Check that the extended brake lines reach without strain.
What’s included
The kit includes front coil springs, radius arm brackets, bump stop extensions, a pitman arm, extended length brake lines, a rear block and U-bolt kit and ES3000 front and rear shocks. Shock boots are not included.









