Select your vehicle

Pro Comp 3 Inch Lift Kit with Front ES6000 Shocks and Rear ES9000 Shocks – K5081B

Pro Comp Suspension

Shop Pro Comp Suspension Lift Kits on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • The 3-inch lift kit is designed for 4WD and 2WD PreRunner models
  • Front ES6000 spring seat shocks with coil springs at the front
  • Lift blocks and U-bolts at the rear with sway bar brackets
  • Rear ES9000 shocks and no steering correction required

Description

Overview

The Pro Comp K5081B is a 3-inch lift kit with front ES6000 spring seat shocks and rear ES9000 shocks, built for 4WD and 2WD PreRunner models. The front uses coil springs, and the rear uses lift blocks with U-bolts.

No steering correction is needed for this kit. Sway bar brackets come with the kit. The lift height is 3 inches, within a range of 3 to 4.99 inches.

Key features

  • 3-inch lift height
  • Front coil springs
  • Front ES6000 spring seat shocks
  • Rear lift blocks and U-bolts
  • Sway bar brackets
  • No steering correction required

Coil springs and lift blocks

Coil springs at the front carry the truck’s weight differently than a stock torsion setup, and the ES6000 spring seat shock is designed to work with that arrangement. Lift blocks at the rear raise the axle, which changes the shock angle and how the sway bar links sit. Check the fit of the links once the lift is installed.

Ride quality often changes with a coil spring lift. Expect a slightly different response on rough pavement, and watch the front end for drift or bump steer after the first few drives. Replace worn bushings and tie rod ends at the same time so the new geometry works as planned.

  • Check sway bar link length and bushings
  • Inspect U-bolts for tightness after initial use
  • Confirm shock clearance at full travel

Specifications

Brand Pro Comp Suspension
Part number K5081B
UPC 614901034417
Lift height 3 inch (lift height range 3 to 4.99 inches)
Suspension type Coil spring kit
Front lift Coil springs
Steering correction None required
Rear lift Lift blocks and U-bolts
Front shocks ES6000 spring seat
Rear shocks ES9000

Vehicle fitment

The kit is designed for 4WD and 2WD PreRunner models. Verify year, model and trim against your truck before ordering.

Because no model years are listed, do not assume coverage from the PreRunner name alone. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

A 3-inch coil spring lift with lift blocks changes the rear and front ride height, so check the alignment and the brake lines after installation.

What’s included

The kit includes front coil springs, the rear lift blocks and U-bolts, sway bar brackets, ES6000 front spring seat shocks, and ES9000 rear shocks.

SKU: EXPK5081B Category:

Specification

Shipping weight 74.80 lbs
Package dimensions 0.00 × 0.00 × 0.00 in
brands

Questions & Answers

Which trucks does the K5081B fit?

The kit is designed for 4WD and 2WD PreRunner models. Confirm fit for your vehicle's year, model and trim before ordering.

Is steering correction needed?

No. The specifications table lists none required for this kit, and the sway bar brackets are the only additional front hardware named.

Which shocks are included?

The kit includes ES6000 spring seat shocks at the front and ES9000 shocks at the rear. Both come with this 3-inch kit.

How do I know when lift blocks need replacing?

Replace lift blocks if you see cracks, bent plates, or shifting around the axle. Check U-bolt torque after rough use, and inspect the rubber and bushings near the blocks for wear or tearing.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Pro Comp Suspension Lift Kits on Amazon