Overview
The Pro Comp K2084T is a 6-inch stage 1 suspension lift with PRO-X front and rear shocks for the 2012–2018 Ram 1500. The listed lift height range is 6 to 7 inches, and the shocks come with the kit.
A 6-inch suspension system is built for the 2012–2013 Ram 1500 4WD trucks, with new CNC machined knuckles and redesigned crossmembers. That geometry keeps toe change minimal through suspension travel and supports longer tread life. The system is 100% compatible with the factory electronic stability program.
Key features
- New CNC machined knuckles
- Redesigned crossmembers that Pro Comp says improve suspension geometry
- Minimal toe change during suspension travel
- Spacer rear lift with PRO-X rear shocks
- PRO-X front shocks included
Stability control and brake checks
Electronic stability and traction systems read wheel speed and steering input to decide when to act. Changes to ride height and tire diameter can shift those readings, so warning lights should be watched closely after the work. The knuckles and crossmembers in this system are designed to keep the front geometry steady through suspension travel.
A spacer rear lift also changes brake hose length and the position of the ABS sensor wiring. Look over the hoses and wiring for stretch or chafing, and make sure the rear shocks clear the new height at full compression. Keeping the front end aligned helps the stability system work as intended.
- Check for ABS or stability warning lights after the first drive
- Inspect brake hoses for stretch
- Look for uneven tire wear
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K2084T |
| Suspension type | Lift kit, stage 1 |
| Lift height | 6 inches, listed range 6–7 inches |
| Front shocks | PRO-X, included |
| Rear shocks | PRO-X, included |
| Rear lift component | Spacer |
| Electronic stability program | Pro Comp states 100% compatible |
Vehicle fitment
The kit fits the 2012–2018 Ram 1500 in the Big Horn, Express, HFE, Laramie, Rebel, R/T, SLT, Tradesman and Tradesman HD versions. Pick the exact year and trim of your Ram 1500 before ordering.
Pick the exact year and trim of your Ram 1500 before ordering, since the year range is narrow.
Installation notes
Pro Comp says installation by a Pro Comp Authorized Installer qualifies the kit for its Lift Shield 5 Year/60,000 mile powertrain warranty at no additional cost. Because the spacer lift raises the rear, check the driveline angles and alignment after the lift is installed.
What’s included
New CNC machined knuckles, redesigned crossmembers, PRO-X front and rear shocks, and the rear spacer.


















