Overview
The Pro Comp K4143BP is a 6-inch lift kit with Pro Runner shocks. It adds front crossmembers and steering knuckles, impact struts, and a rear block and U-bolt kit.
The crossmembers and knuckles set the front height, and no steering correction is needed. Front sway bar spacers and brake line extension brackets keep the bar and the brake lines working at the new height.
Key features
- 6-inch lift height
- Front crossmembers and steering knuckles
- Impact struts
- Front sway bar spacers
- Brake line extension brackets
- Rear block and U-bolt kit
Front knuckles and impact struts
Steering knuckles and impact struts carry braking and cornering loads once the front end is raised. The struts keep the axle from rotating under hard acceleration, so their bushings and mounting bolts should be inspected during routine service. Any clunk over bumps or play at the strut ends is a reason to pull the wheel and look closer.
Front sway bar spacers change how the bar works at the new height, so the end links can see more angle than before. Check the links for cracked boots and worn ball joints, and listen for knocking on uneven pavement. Keep the bar bushings clean and lubricated to prevent squeaks.
Brake line extension brackets allow the hoses to reach the raised front end without stretching. Look for hoses that rub on the tire or spring at full steering lock, and replace any with cracks or bulges. Bleed the brakes after any hose work to keep the pedal firm.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K4143BP |
| UPC | 70000637847 |
| Lift height | 6 inch (lift height range 5 to 6.99 inches) |
| Lift kit stage | Stage 1 |
| Suspension type | Knuckle |
| Front control | Crossmembers, steering knuckles and impact struts |
| Steering correction | None required |
| Rear lift | Block and U-bolt kit |
| Front shocks | Re-use OEM |
| Rear shocks | Pro Runner |
Vehicle fitment
Check fit against your vehicle’s year, model and trim before you place an order. Do not assume a match from a generic fit label.
Do not assume coverage from the Direct Fit label alone. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The crossmembers and knuckles change the front suspension geometry, so schedule an alignment and check the driveline angles after the install.
What’s included
The kit includes front crossmembers, steering knuckles, impact struts, front sway bar spacers, brake line extension brackets, and the rear block and U-bolt kit. The rear shocks are Pro Runner units as the product name states.









