Overview
The Pro Comp K4055B is a 4-inch stage 1 coil spring lift with ES3000 front and rear shocks. It fits 1990–1996 Ford Bronco and 1990–1996 Ford F-150 trucks, with a lift height range of 3 to 4.99 inches.
The front uses coil springs with radius arm brackets, bump stop extensions and extended length brake lines. The rear is lifted with a block and U-bolt kit, and a pitman arm corrects the steering. The shock boots are not included.
Key features
- 4-inch stage 1 lift
- Front coil springs with radius arm brackets
- Bump stop extensions
- Pitman arm steering correction
- Extended length brake lines
- Rear block and U-bolt lift
Brake line and bump stop checks
A front lift increases the distance the brake hose must cover between the frame and the caliper. Extended length brake lines are included to allow for that, but the routing still needs a look once the suspension has settled. A hose that is pulled taut at full droop or pinched at full steering lock is a common problem after lifting.
Bump stop extensions set the point where the suspension meets the frame on hard compression. They protect the springs and shocks from bottoming out, and their position should be checked after the springs settle. Clearance around the pitman arm and steering linkage should also be checked at full lock.
- Inspect brake hoses for strain at full droop
- Check bump stop contact marks after the first drive
- Confirm steering linkage clearance at full lock
- Look for cracked or torn bump stop rubber
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K4055B |
| UPC | 614901125047 |
| Lift | 4 inches, stage 1 |
| Lift height range | 3 to 4.99 inches |
| Suspension type | Radius arm |
| Front lift | Coil springs |
| Rear lift | Block and U-bolt kit |
| Steering correction | Pitman arm |
| Front shocks | ES3000 |
| Rear shocks | ES3000 |
| Shock boots | Not included |
Vehicle fitment
It fits 1990–1996 Ford Bronco and 1990–1996 Ford F-150 trucks.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Radius arm brackets and a block and U-bolt rear lift change the suspension geometry, so check the alignment and the driveline angles after installation. Confirm the brake lines reach at the new height before the wheels are fitted.
What’s included
The kit includes front coil springs, radius arm brackets, bump stop extensions, a pitman arm, extended length brake lines, a rear block and U-bolt kit and ES3000 front and rear shocks. Shock boots are not included.









