Overview
The Pro Comp 3.5-inch Lift Kit with PRO-VST 2.5-inch Coilovers and Shocks, part number K5097BX (EXPK5097BX), gives 3 to 3.5 inches of suspension lift on the Toyota 4Runner and FJ Cruiser. It fits 2003 to 2009 4Runner models and 2007 to 2009 FJ Cruiser models.
The kit is built around PRO-VST coilovers, tuned for 33-inch tires on 17-inch wheels. It includes PRO-VST front and rear shocks, 2.5-inch coilovers and rear coil springs. The lift height range is 0 to 3.5 inches, and the kit is designed to keep ride quality close to the factory setup while adding ground clearance. The 33-inch tire fitment is the main reason for the lift.
Key features
- 3 to 3.5-inch suspension lift
- 2.5-inch PRO-VST coilovers
- PRO-VST front and rear shocks included
- Rear coil springs included
- Designed for 33-inch tires on 17-inch wheels
- Bolt-in design without frame modifications
Alignment and driveline after lifting
A suspension lift raises the body relative to the axles, which changes the angles of the driveline, the steering geometry and the brake lines. Higher angles can cause driveline vibration, and the joints can wear faster if the angles are not checked. After the install, measure the driveline angles and have the alignment set, since toe and camber shift when the ride height changes.
Lifted vehicles also need attention to the brake hoses, the sway bar links and the shock mounts, which can reach their travel limit sooner than before. Check that the tires clear the fenders at full compression and at full extension. Retorque the suspension fasteners after the first few drives, because new parts settle as the components take their load.
- Measure driveline angles after the install
- Check brake hoses for stretch at full droop
- Retorque suspension fasteners after the first drives
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXPK5097BX (title K5097BX) |
| Suspension type | Lift kit |
| Lift | 3 to 3.5 inches |
| Lift height range | 0 to 3.5 inches |
| Tire size | 33 inch |
| Wheel size | 17 inch |
| Shocks | PRO-VST front and rear, included |
| Coilovers | PRO-VST 2.5-inch |
| Springs | Rear coil springs |
| Fitment | Direct fit |
Vehicle fitment
The kit fits the 2003-2009 Toyota 4Runner and the 2007-2009 Toyota FJ Cruiser.
The list does not include 2010 and newer 4Runner models or the FJ Cruiser from 2010 on, so those years are not confirmed for this part number. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit is a bolt-in fit that needs no frame modifications. Lifting the vehicle changes alignment and driveline angles, so plan a wheel alignment and a driveline check after the install. Check that the shocks and springs clear the tires at full suspension travel.
What’s included
The lift kit with PRO-VST front and rear shocks, 2.5-inch coilovers and rear coil springs.














