Overview
Part number EXPK4241M (kit K4241M) is a 2-inch suspension lift for 2011 to 2016 Ford F-250 Super Duty and F-350 Super Duty trucks. It is designed around 37-inch tires and fits both truck models.
The Explorer line is built as a low center-of-gravity suspension for late-model trucks that need larger tires without changing the factory ride. This kit brings a 2-inch lift and PRO-M shocks to that setup.
The PRO-M shocks are monotube units and are included with the kit. Pro Comp says they respond quickly and hold steady performance without fading or leaking. The lift components bolt in, and Pro Comp says no frame modifications are needed.
Super Duty trucks carry heavier loads than a half-ton pickup. The Explorer systems are made for mid-size, half-ton and three-quarter-ton trucks, and this kit fits the 2011 to 2016 F-250 and F-350 Super Duty.
The specifications give a 2-inch lift together with a 37-inch tire size, which together set the expected stance for the truck.
The kit is designed around 37-inch tires, which suits late-model trucks that need larger tires.
Key features
- 2-inch suspension lift
- PRO-M monotube shocks included
- Designed for 37-inch tires
- Bolt-in installation with no frame modifications.
- Fits both F-250 and F-350 Super Duty trucks.
Choosing tires and wheels
A 2-inch lift creates room for larger tires, but the final fit depends on wheel offset, backspacing and the tire’s overall diameter. Check clearance at full steering lock and at full suspension compression before driving on the new setup. Rubbing often shows first at the inner fender liner and near the front track bar brackets.
Heavier tires add rotating mass, which changes acceleration, braking and how the drivetrain responds. Many owners review brake hoses, the steering stabilizer and driveshaft angles at the same time, since the new height affects them. Re-torque the wheel fasteners after the first few drives and check them again at routine service intervals.
- Wheel offset and backspacing
- Brake hose length
- Steering stabilizer condition
- Driveshaft angle check
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXPK4241M |
| Kit code | K4241M |
| Suspension type | Lift kit |
| Lift height | 2 inches |
| Tire size | 37 inches |
| Shocks included | Yes, PRO-M |
| Front shocks | PRO-M |
| Rear shocks | PRO-M |
| Fit type | Direct fit |
Vehicle fitment
It fits the 2011 to 2016 Ford F-250 Super Duty and F-350 Super Duty, across the King Ranch, Lariat, Platinum, XL and XLT versions. Models from 2010 and earlier and from 2017 and newer are not covered by this kit. Confirm your vehicle’s year, model and trim before ordering.
The list does not include 2010 and earlier Super Duty trucks or 2017 and newer models, which fall under a separate kit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A Super Duty raised by a lift kit needs an alignment and a driveline angle check after installation.
What’s included
The 2-inch lift kit with PRO-M shocks.














