Overview
The Pro Comp 2.5-inch Stage I Lift Kit with PRO-X Shocks, part number EXPK1060T (kit K1060T), is a stage 1 suspension lift for 1976 to 1986 Chevrolet K20 and GMC K2500 trucks. It also covers the Suburban versions and a 1986 GMC C2500 Suburban.
The kit lifts the truck 2.5 inches at stage 1, and the specifications give a lift height range of 0 to 3.5 inches. The back of the truck is raised with a block or spacer and a block and U-bolt component. PRO-X shocks are listed at the front and the rear, and they are included with the kit.
Key features
- 2.5-inch stage 1 suspension lift
- PRO-X shocks at the front and rear, included
- Block or spacer rear lift with a block and U-bolt component
- Lift height range of 0 to 3.5 inches
- Designed for 33-inch tires
Understanding a rear block lift
A block or spacer lift raises the rear of the truck without changing the leaf springs. Because the back moves higher than the front, the driveshaft angle becomes steeper, and that angle is the main thing to watch after installation. Extending brake lines and checking the parking brake cable may also be needed on some trucks, so inspect them during the install.
Stage 1 kits are often chosen for trucks that mostly drive on pavement with occasional light trail use. Tire clearance, steering stops and the front suspension all matter when a lift is combined with larger tires. Recheck fasteners and U-joints at every service interval, and watch for vibration at highway speed.
- Measure front and rear ride height after installation
- Inspect U-joints for play and wear
- Check brake lines and cables for stretch
- Recheck the driveshaft angle periodically
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXPK1060T |
| Kit code | K1060T |
| Suspension type | Lift kit, stage 1 |
| Lift height | 2.5 inches stage 1; range 0 to 3.5 inches |
| Rear lift method | Block or spacer |
| Rear lift component | Block and U-bolt |
| Tire size | 33 inches |
| Front shocks | PRO-X |
| Rear shocks | PRO-X |
| Fit type | Direct fit |
Vehicle fitment
It fits 1976 to 1986 Chevrolet K20 and K20 Suburban, 1979 to 1986 GMC K2500 and K2500 Suburban, 1976 to 1978 GMC K25 and K25 Suburban, and a 1986 GMC C2500 Suburban. The Base, Custom, Deluxe, High Sierra, Sierra Classic and Silverado versions are covered.
The list does not include 1975 and earlier K20 trucks or 1987 and later models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The block or spacer rear lift raises the back of the truck, so measure front and rear heights after installation and check the alignment.
What’s included
The 2.5-inch stage 1 lift kit with PRO-X front and rear shocks.













