Overview
The Omix-ADA 12301.06 is a windshield glass seal lock, a small direct OE replacement Jeep part from Omix-Ada.
Windshield seal care
A windshield seal lock holds the glass seal in place, so a loose or damaged lock can let the seal lift and allow water into the cabin. Check the seal at routine service and after any windshield work, looking for lifting edges, cracks and dried or hardened material. Cleaning the channel before reseating the seal keeps the fit consistent.
If water appears on the floor or dash, trace the path back to the seal rather than only the glass, since water can enter at the seal edge or at the lock point. Replace a worn seal lock or seal before the leak damages interior panels. Glass work can be dangerous, so have a professional handle the job when the glass has to come out.
- Look for water staining near the windshield base
- Clean the seal channel before reseating
- Replace hardened or cracked seal material
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 12301.06 |
| UPC | 804314057367 |
| Part type | Windshield glass seal lock |
| Fit type | Direct Fit |
| Warranty | Limited five year warranty. |
Vehicle fitment
It is a direct OE replacement, so compare it with the original seal lock before ordering.
Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Tighten all fasteners to the specified torque, and compare the new part with the old one before installing. Re-check fastener tightness after the first miles of driving, and make sure the windshield seal stays seated and weathertight. Have a professional help if the glass has to be removed.












