Overview
The King Shocks 20001-205 is a 2.0 internal reservoir Performance Series rear shock kit, sold as a pair for 2 and 4-door Jeep models with 6 inch lift kits. It is an OEM performance kit with damping and spring rate developed through real world testing.
The kit suits stock height installs as well as custom kits for trucks running lifted aftermarket suspensions. Each pair has large diameter micro-polished shafts and shaft mounted urethane foam bumpers that cushion the shock at full bottoming.
Key features
- Sold as a pair
- Rear position
- Large diameter micro-polished shafts
- Shaft mounted urethane foam bumpers
- Simple bolt on installation
- Gas charged Performance Series construction
- Suited to 6 inch lift kits.
Rear shock pairs and lift height
Rear shocks work with the leaf or coil springs to control axle movement, so the pair should behave the same on both sides. Mixing a new shock with a worn one can cause the rear to sway in turns or bounce differently over ruts. Replacing both shocks together keeps damping consistent across the axle.
Lift height changes the angle and length the shock works through, so the lift range matters when choosing a rear pair. Check the bumpers on the shaft for compression, since worn foam loses its cushioning. Keep the shafts clean and inspect the seals for oil film after trail use.
- Replace rear shocks in pairs
- Check lift height against the application
- Inspect shaft bumpers for wear
- Look for oil film around seals
Specifications
| Brand | King Shocks |
|---|---|
| Part number | 20001-205 |
| UPC | 70000558767 |
| Series | Performance Series |
| Design | Internal reservoir |
| Charge | Gas charged |
| Position | Rear |
| Quantity | Sold as a pair |
| Shaft | Large diameter, micro-polished |
| Bumpers | Shaft mounted urethane foam |
| Lift kit application | 6 inch lift kits |
Vehicle fitment
Fit depends on year, model and trim. The kit suits 2 and 4-door Jeep models with 6 inch lift kits.
Confirm fit for your exact year, model and trim, and compare your lift height with the 6 inch lift kit application before ordering.
Installation notes
Installation is bolt on. Check your lift height against the 6 inch lift kit application before ordering.
What’s included
The kit is two rear shocks sold as a pair. Check the package contents against your installation before starting.














