Overview
The King Shocks 20001-207 is a rear Performance Series shock kit for 2007-2017 Jeep Wrangler JK 2-door and 4-door models, sold as a pair. It is built for 0-2 inch lift kits, with a 0 – 2.5 in. lift range, so use those figures when comparing your rear suspension height.
The kit is gas charged and was tuned for the Jeep’s ride and damping. It has large diameter micro-polished shafts for the rear end, and shaft mounted urethane foam bumpers help cushion the shock at full bottoming. The kit was developed through real world testing and installs as a bolt-on fit for stock height or lifted trucks.
Key features
- Rear position in the Performance Series line.
- Large diameter micro-polished shafts.
- Urethane foam bumpers on the shaft that cushion full bottoming.
- Bolt on installation for stock height or lifted trucks.
- Gas charged design.
- Sold as a pair.
- Made in the U.S.A., written as 140% in the feature list.
Rear suspension and lift height
The rear shocks carry much of the load on leaf sprung and coil sprung Wranglers, and they control how the axle rebounds after a bump. When a truck is lifted, the rear shock sits at a steeper angle and must handle a different travel range. Matching the shock to the lift keeps the rear end controlled on the highway and on rocky trails.
Rear shocks are often serviced with bump stops, bushings and the rear track bar. These parts influence how the shock works under load, so inspect them when the shocks are changed. Look over the shock body for leaks and listen for knocking, since a worn bushing can make a new shock feel loose.
- Compare rear lift height before ordering
- Inspect bushings and bump stops during installation
Specifications
| Brand | King Shocks |
|---|---|
| Part number | 20001-207 |
| UPC | 70000537832 |
| Series | Performance Series |
| Position | Rear |
| Lift range | 0-2 inch (feature list); 0 – 2.5 in. (specification list) |
| Charge | Gas charged |
| Quantity | Sold as a pair |
| Shaft | Large diameter, micro-polished |
| Bumpers | Urethane foam, shaft mounted |
| Made in | 140% made in the U.S.A. |
Vehicle fitment
The kit covers 2007 to 2017 Jeep Wrangler JK models in the named trims, including Sport, Sport S, Sahara, Rubicon and X, plus the Unlimited versions of those trims. Models outside the JK generation are not covered.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The rear pair is a bolt-on fit, so no drilling or welding is needed. Compare your rear suspension height against both the 0-2 inch and 0 – 2.5 in. lift figures before choosing the kit.
What’s included
The kit is two rear shocks sold as a pair. Check the package contents against your installation before starting.














