Select your vehicle

2.5″ OEM Performance Remote Reservoir Shock Absorbers

King Shocks

Shop Toyota 4Runner Shock Absorbers on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • King Shocks 25001-279 rear OEM Performance remote reservoir shocks, quantity 2 per pack
  • Fits 2010 to 2017 Toyota 4Runner
  • Non-adjustable monotube design with 15.58 in. compressed and 24.29 in. extended length
  • Hard anodized 6063 aluminum body and heat treated 6061 piston

Description

Overview

The King Shocks 25001-279 is a pair of rear OEM Performance shock absorbers with remote reservoirs. They fit the 2010 to 2017 Toyota 4Runner.

The damping curve and spring rate are tuned for ride quality and performance. The kit bolts on at stock height, and a custom version is available for trucks running lifted aftermarket suspensions.

Key features

  • Monotube internal design
  • Hard anodized 6063 aluminum alloy body
  • Heat treated 6061 aluminum alloy piston
  • Rulon composite wear bands for wear resistance
  • Non-adjustable, without an adjuster
  • Remote reservoir with 2.5 in. body diameter

Choosing remote reservoir shocks

Remote reservoir shocks move the gas and oil reserve out of the shock body and into a separate tube. That spacing gives the damper room to run cooler during long descents and repeated hard use on rough trails, and it keeps damping more consistent over a day of driving. The reservoir needs clearance from tires, frame members and linkage, so plan its route before mounting.

Replace shocks in pairs so both sides respond the same way. Mixing an old shock with a new one can pull the vehicle to one side and make handling uneven. Check bump stops, springs and control arm bushings while the shocks are off, since worn parts affect how the new shocks perform.

  • Look for oil seepage around the shock body and reservoir hose
  • Listen for knocking at the mounts after rough driving
  • Check that the reservoir stays secure after each trail outing
  • Note uneven tire wear, which can point to worn dampers

Specifications

Brand King Shocks
Part number 25001-279
UPC 70000584711
Position Rear driver and passenger side
Quantity 2 per pack
Body diameter 2.5 in.
Compressed length 15.58 in.
Extended length 24.29 in.
Travel 8.71 in.
Adjustment Without adjuster (non-adjustable)
Body material 6063 hard anodized aluminum alloy
Piston material 6061 heat treated aluminum alloy
Wear bands Rulon composite
Reservoir Remote

Vehicle fitment

Based on the product’s short description, these rear shocks fit the 2010 to 2017 Toyota 4Runner. Other 4Runner model years are not covered by that range.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

It bolts on at stock height. For lifted trucks, use the custom kit and match it to your current ride height before fitting it.

What’s included

Two rear King 2.5 in. OEM Performance shock absorbers with remote reservoirs, quantity 2 per pack.

SKU: KST25001-279 Category:

Specification

Shipping weight 38.00 lbs
Package dimensions 33.00 × 13.00 × 7.00 in
brands

Fitment

VehicleYearsTrims
Toyota 4Runner likely fits2010–2017All

Vehicles marked "likely fits" are inferred from the product description rather than a manufacturer fitment list. Please confirm fitment with the manufacturer before ordering.

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the King 25001-279 fit a 2010 Toyota 4Runner?

Yes. The shocks fit 2010 to 2017 Toyota 4Runner models and are for the rear driver and passenger sides. Confirm your year, model and trim before ordering.

Are these King shocks adjustable?

No. The shocks are non-adjustable, with no adjuster. The remote reservoir is part of the design, and the compressed length is 15.58 inches with 24.29 inches extended.

How many shocks are in one pack?

The pack contains two shocks, quantity 2 per pack. Fitment covers 2010 to 2017 Toyota 4Runner only, so confirm fit for your vehicle's year, model and trim before ordering, especially for other 4Runner generations.

Should these shocks be replaced in pairs?

Yes. Replacing both rear shocks together keeps damping even on both sides, which helps stability when cornering and on uneven ground. Mixing old and new units can leave one side firmer than the other.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Toyota 4Runner Shock Absorbers on Amazon