Overview
The Icon Suspension V.S. 2.0 Aluminum Series front shock, part number 26519, is a gas charged shock absorber for the 2007–2017 Jeep Wrangler JK, designed for a 2-3 inch front lift. ICON engineers tune each Vehicle Specific (V.S.) shock for its application, so the valving is set for the Wrangler it is listed against rather than a generic setup.
The shock is aimed at everyday street drivers and weekend off-road owners who want steadier control on pavement and on trails. The monotube body with an internal reservoir is built to keep damping consistent, and the shock can be rebuilt and revalved if you later want to service it or change the tune.
Key features
- Vehicle Specific valving matched to a 2-3 inch front lift on the Jeep JK
- Nitrogen charged monotube design with internal reservoir
- Premium Grade 5WT shock oil for steady damping across a wide range of conditions
- 5/8 inch polished Nitro steel shaft
- 6061 aluminum rod end
- Polyurethane bushings with zinc plated sleeves for the OE factory type mount
- Buna top out bumper for quiet operation at full extension
- 100% rebuildable and 100% revalveable
Wrangler JK front shock care
Front shocks on a Wrangler JK carry steering input, braking and trail impacts, and they work with the springs and track bar to keep the axle controlled. Gas charged monotube designs help damping stay steady as the oil warms, which matters on pavement and on trails. Shocks are typically replaced in pairs so both sides respond the same way over bumps.
Routine checks extend shock life. Look for oil streaks on the body, a shaft that is scored or bent, and bushings that are cracked or compressed. A bouncy front end, uneven tire wear or a steering wheel that feels loose at highway speed all point to a worn shock. If you rebuild or revalve the unit later, keep the factory bolt and bushing set aside for inspection.
Specifications
| Brand | Icon Suspension |
|---|---|
| Part number | 26519 |
| UPC | 70000682323 |
| Position | Front |
| Lift range | 2-3 inch |
| Shock series | 2.0 Shock Series (Aluminum Series) |
| Charge type | Gas charged, nitrogen |
| Shaft | 5/8 inch polished Nitro steel |
| Rod end | 6061 aluminum |
| Body | 6063 anodized aluminum |
| Shock oil | Premium Grade 5WT |
| Bushings | Polyurethane with zinc plated sleeves |
| Top out bumper | Buna |
| Fitment type | Direct fit |
| Made in | U.S.A. |
Vehicle fitment
It is direct fit for the 2007–2017 Jeep Wrangler (JK), including the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims and their Unlimited counterparts.
It does not fit the earlier Wrangler TJ, LJ or YJ, or the 2018 and newer Wrangler JL. Verify year, model and trim before ordering.
Installation notes
Because this is a front shock matched to a 2-3 inch lift, check that your Wrangler’s front lift falls inside that range before fitting it. The included top mounting hardware and bushings go at the top, and the stock bolt is reused at the bottom. Support the vehicle on stands and work on a level surface.
What’s included
One front shock with top mounting hardware and bushings. The stock bolt is used for the bottom mount.
Not included: the second front shock, because this shock is sold individually.