Overview
The Icon Suspension 58635 is a front extended travel coilover shock kit with 3.5 inches of extended travel for the front suspension of a Tacoma. Confirm the model year and generation before ordering, since no years or chassis code are tied to this kit.
Icon Suspension describes these adjustable gas charged coilovers as durable over long use. The kit is meant to be paired with an aftermarket uniball upper control arm kit to keep the intended wheel travel and limit premature ball joint wear.
Key features
- 3.5 inch extended travel for the front suspension
- Adjustable coilover shocks
- Gas charged shock body
- Includes sway bar relocation brackets
- Includes all required hardware.
- Intended for use with an aftermarket uniball upper control arm kit
Front suspension setup
Extended travel front coilovers change the geometry of the front end, so ride height, caster and camber can move after installation. Changes in travel also affect how the steering and driveline respond at full droop and full compression. Plan the upper control arm and coilover setup as one system rather than swapping parts one at a time.
Front components that work hard on extended travel setups include ball joints, tie rod ends, sway bar links and brake lines. Inspect these after the first few drives and again after rough trail use. Replacing worn bushings and joints at the same time as the coilovers keeps the new setup behaving as intended.
- Get an alignment after installation
- Check brake line length at full droop
- Inspect ball joints and tie rod ends
Specifications
| Brand | Icon Suspension |
|---|---|
| Part number | 58635 |
| UPC | 70000454939 |
| Travel | 3.5 in. extended |
| Position | Front |
| Fitment type | Direct Fit |
| Shock type | Gas charged |
| Recommended tire size | 285/75R16 |
| Recommended wheel | 16X8 with 5″ back spacing |
| Included | Front coilovers, sway bar relocation brackets, all required hardware |
Vehicle fitment
No vehicle entries are tied to this kit. Only the Tacoma is named, without model years or a chassis code, so confirm fit by year and generation before ordering. Check your Tacoma year, cab and suspension setup before installing.
No other vehicles are named for this kit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the coilovers are meant for use with an aftermarket uniball upper control arm kit, plan for that kit before installing. Check tire and wheel clearance against the stated 285/75R16 tires and 16X8 wheels. Support the vehicle securely on stands while the front suspension is removed.
What’s included
- Front coilover shocks
- Sway bar relocation brackets
- All required hardware
Not included: the aftermarket uniball upper control arm kit, which the coilovers are meant to be used with.
