Overview
The Fox Racing Shox 980-26-945 is a rear Fox 2.0 Factory Series shock with a smooth body reservoir and a CD adjuster, sold as a direct replacement for listed Dodge Ram 1500, 2500 and 3500 pickups from 1994 through 2018. Fox describes its direct replacement shocks as bolt-on units that its own engineers tested for suspension travel and performance on and off the road.
This is a gas-charged shock with an aluminum body, intended for owners who want a factory-style bolt-in replacement for a truck with up to 1 inch of lift. Its 11.1 inch stroke, 27.45 inch extended length and 16.35 inch collapsed length are given in the specifications below.
Key features
- Smooth body reservoir design from the Fox 2.0 Factory Series
- Aluminum shock body
- CD adjuster for compression damping
- Gas-charged construction
- Direct fit, bolt-on replacement in the rear position
- Lift range of 0 to 1 inch
- 11.1 inch stroke with 27.45 inch extended and 16.35 inch collapsed lengths
Gas-charged shock basics
A gas-charged shock holds nitrogen under pressure inside the body, which helps the damper resist foaming when it works hard. The pressure is why the body should stay intact during removal, since a damaged unit can release gas suddenly. Adjustable compression damping lets you tune firmness, but change one setting at a time and test on familiar roads to see how the truck responds to loads and bumps. Small adjustments are easier to judge than large swings in either direction.
Rear shocks share the work of controlling the axle, so worn bushings at the upper and lower mounts can make a new shock feel loose. Check both ends for play, cracked rubber and corrosion while the truck is raised. Replacing both rear shocks together keeps the ride even, and the same check applies to leaf spring bushings and bump stops that often wear at the same time.
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 980-26-945 |
| UPC | 700007123311 |
| Series | Fox 2.0 Factory Series |
| Position | Rear |
| Body | Aluminum, smooth body reservoir |
| Adjustment | CD adjuster |
| Charge | Gas charged |
| Mounting | Direct fit |
| Lift height | 0 to 1 in. lift |
| Extended length | 27.45 in |
| Collapsed length | 16.35 in |
| Stroke | 11.1 in |
Vehicle fitment
Fits 1994–2008 Dodge Ram 1500 (Base, LT, Laramie, SLT, SRT-10, ST, SXT, Sport, TRX4, WS); 1994–2010 Dodge Ram 2500 (Base, Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX, TRX4); 1994–2010 Dodge Ram 3500 (Base, Laramie, SLT, ST, SXT, Sport, TRX4); 2011–2013 Ram 2500 (Big Horn, Laramie, Laramie Longhorn, Lone Star, Outdoorsman, Power Wagon, SLT, ST, Tradesman); and 2011–2018 Ram 3500 (Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, SLT, ST, Tradesman). The 2009 and later Ram 1500 and the 2014 and later Ram 2500 are not covered. Compare your year, model and trim with this list before ordering.
The fitment does not include the 2009 and later Ram 1500 or the 2014 and later Ram 2500. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because this is a direct replacement, the shock mounts where the original shock mounted, with no drilling described. Gas-charged bodies stay pressurized, so keep the body intact and wear eye protection during removal.
What’s included
The package is one rear shock. Plan for any mounting hardware your installation needs before starting.









