Overview
The FOX883-26-057 is a front Factory Race Series 3.0 internal bypass remote reservoir shock set with a DSC adjuster. It fits the 2020 to 2026 Jeep Gladiator in Launch Edition, Overland, Rubicon, Sport and Sport S, and the 2018 to 2026 Wrangler JL in the 2-door and Unlimited 4-door trims named.
The internal bypass design uses regulated ports that let fluid bypass the piston through initial travel, then force fluid through the piston at the extremes of compression and rebound. It is suited to position-sensitive damping.
The damping gives a smooth ride over normal off-road terrain and increases damping force when the suspension reaches harsh bottom-outs or top-outs.
The body is hard-anodized aluminum with precision-machined components and race-bred internal valving. The shocks are designed to bolt onto OEM shock pivots on a 2 to 3 inch aftermarket suspension lift kit.
The remote reservoir is a new recirculating reservoir bridge with a hard-anodized, CNC-machined aluminum reservoir. Its external fins act as a heat sink, which FOX says keeps shock oil temperature steady for consistent damping.
The shafts are stainless steel, the bearings are PTFE-lined spherical, the oil is proprietary racing oil and the seals are high-temperature Viton. These parts are shared with the Trophy Truck shock line.
Key features
- Position-sensitive internal bypass
- Remote reservoir with external heat-sink fins
- Hard-anodized, CNC-machined aluminum reservoir and body
- Stainless steel shock shafts
- PTFE-lined spherical bearings and high-temperature Viton seals
- Designed for a 2 to 3 inch aftermarket lift kit
Remote reservoirs and heat control
A remote reservoir gives an internal bypass shock more oil and gas capacity, which helps keep damping steady when the shock runs hot during long descents or repeated hard hits. The external fins on the canister increase surface area so heat leaves the oil more easily. Keep the fins clear of mud and debris, since blocked airflow reduces their cooling effect.
Front shock sets on lifted Wranglers and Gladiators see high loads through the front axle, so related parts such as bushings, sway bar links and steering components often need inspection after a lift. The reservoir hose should be routed clear of the tire, the steering linkage and any skid plate. After a few trail runs, recheck the clamp bolts and mount hardware for tightness.
Specifications
| Brand | FOX |
|---|---|
| Part number | FOX883-26-057 |
| Series | Factory Race Series 3.0 (3.0 Bypass Res) |
| Position | Front |
| Shock type | Reservoir, internal bypass |
| Top mount | Eyelet |
| Bottom mount | Eyelet |
| Charge | Gas charged |
| Body | Hard-anodized aluminum |
| Shafts | Stainless steel |
| Bearings | PTFE-lined spherical |
| Seals | High-temperature Viton |
| Lift design | 2 to 3 inch aftermarket lift kits |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2020 to 2026 Jeep Gladiator in Launch Edition, Overland, Rubicon, Sport and Sport S models. It also fits the 2018 to 2026 Jeep Wrangler JL in 2-door models (80th Anniversary, Freedom, Islander, Rubicon, Sport and Sport S), Unlimited 4-door models in the trims named, and the High Altitude, Rubicon 392, Rubicon 4xe and Sahara 4xe variants.
The list covers Gladiator and Wrangler JL models from 2018 to 2026 only. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm your lift height falls in the 2 to 3 inch range before fitting. Check driveline angles and front alignment after the lift is installed.
What’s included
Verify how many shocks the set contains.

















