Overview
The FOX Performance Series 2.0 Reservoir Smooth Body Shock Set, part number FOX985-24-229, is a rear shock set sized for a 3.5 to 4 inch lift on the 2020–2026 Jeep Gladiator. Each rear shock has an external reservoir, eyelet mounts at both ends and a 2.0 in body.
The reservoir adds oil and nitrogen capacity, which helps the damping stay steady under the heavier rear loads of a lifted truck. The aluminum body is clear anodized and metal-impacted, which helps it shed heat.
Rear shocks on a Gladiator with a 3.5 to 4 inch lift run at a longer stroke and carry more of the load at the back of the truck. The reservoir gives each rear shock extra oil and nitrogen, which FOX says supports consistent damping under those conditions. The billet clamp holds the reservoir, and the aluminum body is clear anodized to help it shed heat.
Compare the rear mounts on your current shocks with the 2.0 in body and eyelet ends before ordering, especially if the truck has a lift kit that changes the rear geometry.
Key features
- Sized for a 3.5 to 4 inch lift.
- Billet reservoir clamp included.
- External reservoir with extra oil and nitrogen capacity.
- Clear anodized, metal-impacted aluminum body.
- High flow damping piston with application-specific valving.
Rear shocks on a lifted Gladiator
Rear shocks on a Gladiator with a lift run at a longer stroke and carry more of the load at the back of the truck. A reservoir gives each rear shock extra oil and nitrogen capacity, which supports steady damping under those conditions. The billet clamp holds the reservoir in place, so the reservoir stays secure when the rear is working over uneven ground.
A lift can also change the rear geometry, so check the rear mounts, the bump stops and the springs before installing a new set. Look for oil on the body or reservoir hose, worn eyelet bushings and any play at the mounts. Replace the shocks as a pair so both sides control the rear the same way, and recheck the clamp bolts after the first few trips over rough ground.
Specifications
| Brand | FOX |
|---|---|
| Part number | FOX985-24-229 |
| Shock series | 2.0 Performance Series |
| Position | Rear |
| Lift range | 3.5 to 4 in |
| Top mount | Eyelet |
| Bottom mount | Eyelet |
| Body diameter | 2.0 in |
| Shock type | Reservoir |
| Charge | Gas charged |
Vehicle fitment
It fits the 2020–2026 Jeep Gladiator across its trims, including High Altitude, Launch Edition, Mojave, Overland, Rubicon, Sport S and Willys. Wrangler and other models do not fit.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
A rear reservoir shock set with the billet reservoir clamp.











