Overview
Part number FOX885-24-248 is a front reservoir shock set for a 3.5 to 4 inch lift on the 2020–2026 Jeep Gladiator. Each shock has an aluminum body, an external reservoir and eyelet mounts at both ends.
Front shocks on a larger lift cover more travel and more angle. This set uses a reservoir for extra oil and nitrogen capacity, and the clear anodized aluminum body helps the shock dissipate heat. The damping piston is high flow with valving matched to the application.
At a 3.5 to 4 inch lift, the front shocks have more travel and more angle to work through. The reservoir gives each shock extra oil and nitrogen capacity, which supports steady damping through the longer stroke. The clear anodized aluminum body helps it shed heat on long drives over rough ground.
Check the lift height on your Gladiator before ordering, and confirm the set is the one for that range rather than the 2 to 3 inch or 4.5 to 6 inch option.
Key features
- Sized for a 3.5 to 4 inch lift.
- External reservoir for extra oil and nitrogen capacity.
- Clear anodized aluminum body.
- Reservoir clamp included.
- High flow damping piston with application-specific valving.
Travel and angle at higher lift
Front shocks on a larger lift have to cover more travel and work through more angle than shocks on a stock-height truck. A reservoir design gives each shock extra oil and nitrogen capacity, which supports steady damping through the longer stroke. The clear anodized aluminum body helps the shock shed heat, which matters on long drives over rough ground where the front end is working hard.
At this lift height, the upper mounts, bump stops and steering parts all carry more of the change, so check them alongside the shocks. Look for worn eyelet bushings, cracked rubber and loose hardware after the first trips. Measure the new set’s eyelet spacing against the old shocks before removing anything, and keep the reservoir clear of the frame and brake lines during the install.
Specifications
| Brand | FOX |
|---|---|
| Part number | FOX885-24-248 |
| Shock series | 2.0 Performance Series |
| Position | Front |
| Lift range | 3.5 to 4 in |
| Top mount | Eyelet |
| Bottom mount | Eyelet |
| Shock type | Reservoir |
| Charge | Gas charged |
Vehicle fitment
It fits the 2020–2026 Jeep Gladiator, including the Altitude, High Altitude, Launch Edition, Mojave, Overland, Rubicon, Sport and Willys trims. Wrangler models do not fit.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
A front reservoir shock set with the reservoir clamp.















