Overview
The FOX985-24-179 is a front Performance Series 2.0 smooth body IFP monotube shock for the 2020 to 2026 Jeep Gladiator and the 2018 to 2026 Jeep Wrangler JL. It covers the Gladiator trims and Wrangler JL 2-door and Unlimited 4-door trims.
This shock is a front monotube unit with a gas charge. Compare the body diameter, mounts and length with the original shock before fitting.
The Performance Series uses current shock technology and race-developed damping control for comfort on the road and predictable handling off road. The aluminum body helps cooling and resists rust.
Inside, the IFP separates the shock oil from the high-pressure, nitrogen-charged gas chamber. This prevents oil aeration, so the factory-tuned valving can work as designed, and the high flow damping piston uses application specific valving for a steady ride on rough ground.
Key features
- Front position
- Monotube design
- Internal floating piston with nitrogen gas chamber
- Aluminum body for cooling and rust resistance.
- Application specific valving.
Monotube shocks on rough ground
A monotube shock uses one main cylinder with a floating piston, which keeps the damping fluid under steady pressure. On a Jeep that spends time on uneven trails, that steady pressure helps the shock recover quickly after repeated impacts and keeps wheel control more consistent from one hit to the next.
Monotube designs also tend to run cooler than twin-tube designs of similar size, which matters on long descents. When replacing a front shock, match the new unit to the other front corner and check the bushings at both ends. Mixing old and new damping on the same axle can make steering feel uneven.
- Replace front shocks in pairs for even handling
- Inspect the bushings and mounting hardware at each service
- Watch for fluid on the shock body after hard use
Specifications
| Brand | FOX |
|---|---|
| Part number | FOX985-24-179 |
| Series | 2.0 Performance Series |
| Position | Front |
| Shock type | Monotube |
| Charge | Gas charged |
| Design | IFP |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2020–2026 Jeep Gladiator (80th Anniversary, Altitude, High Altitude, Launch Edition, Mojave, Overland, Rubicon, Sport, Sport S, Willys and Willys Sport) and the 2018–2026 Jeep Wrangler (JL) 2-door and Unlimited 4-door trims.
The list covers Gladiator and Wrangler JL models from 2018 to 2026 only. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Compare the mounts and length with the original front shock before fitting. Work on a securely supported vehicle.
What’s included
One front monotube IFP shock.









