Overview
The Fabtech K2036DL is an 8-inch 4-link lift with Dirt Logic SS 4.0 coilovers for the 2008 Ford F-250 Super Duty and 2008 Ford F-350 Super Duty. The rear uses a block, U-bolts and an add-a-leaf, and Dirt Logic SS shocks are included.
The 4-link arms replace the upper ball joint with a 1-inch ID stainless American Uniball that sits in the factory ball joint taper. The arms add caster adjustment, and the chromoly tubing gives a firmer feel than stock. The Uniball pin fits without any spindle change. The kit is for factory aluminum suspension trucks only.
A 4-link suspension uses four links to locate the axle, which controls its position as the wheels travel. In this kit the upper arm end uses a Uniball, which removes the upper ball joint from the design.
The added caster built into the arms helps alignment, which is useful after a leveling kit is installed.
Key features
- 8-inch lift, range 7 inches and up
- Dirt Logic SS 4.0 coilovers
- Block, U-bolt and add-a-leaf rear
- 1-inch ID stainless American Uniball
- Chromoly tubing
- Dirt Logic SS shocks included
Before you buy
A 4-link layout keeps the axle located with links instead of relying on leaf springs alone, so the axle stays square to the chassis as the suspension travels. Coilover shocks do the damping in this setup, and their quality shapes how the truck handles washboard roads and rough trail. Heavier trucks put more load through the links and mounts, so inspection after the first few drives is worthwhile.
Larger tires need clearance checked at full steering lock and at full suspension compression before the truck goes on the trail. Rear add-a-leaf packs and U-bolts settle and loosen with use, so they should be looked at on a regular schedule. A lift like this often calls for an alignment after installation, and caster settings should be rechecked once the truck has settled.
- Check tire clearance at full lock and full compression
- Recheck U-bolt torque after the first few trail runs
- Inspect Uniball pins for play at each service
- Schedule an alignment once the lift is complete
Specifications
| Brand | Fabtech |
|---|---|
| Part number | K2036DL |
| UPC | 674866096332 |
| Lift height | 8 inches (range 7 inches and up) |
| Suspension type | Coilover, 4-link |
| Rear lift method | Block, U-bolts and add-a-leaf |
| Shocks | Dirt Logic SS shocks included |
| Tire and wheel fit | 295/70R17 on 17×8, 275/65R18 on 18×8, 285/55R20 on 20×9; 4 1/2-inch and 5-inch backspacing |
Vehicle fitment
It fits the 2008 Ford F-250 Super Duty and the 2008 Ford F-350 Super Duty.
It fits 2008 models only, and all-wheel drive, standard cab and AutoRide shock trucks are excluded. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the factory suspension is the aluminum type before installing. The OEM wheel and tire cannot be used with this kit.
What’s included
4-link arms with Uniball pins, Dirt Logic SS 4.0 coilovers, a block, U-bolt and add-a-leaf rear kit and the Dirt Logic SS shocks.









