Overview
The Fabtech K1084M is a 6-inch Gen II basic lift with rear Stealth monotube shocks for the 2014–2015 and 2017–2018 Chevrolet Silverado 1500 and GMC Sierra 1500. It uses a knuckle suspension type with rear lift blocks and U-bolts, and shocks are included.
Check tire sizes and installation steps against your vehicle before starting. This kit uses the Stealth shock version rather than the performance shocks on the standard K1084, and it is for trucks with factory aluminum suspension.
Key features
- 6-inch Gen II basic system
- Stealth monotube shocks included
- Rear lift blocks and U-bolts
- Knuckle suspension type
- Built for factory aluminum suspension trucks
Stealth shocks and daily driving
Monotube shocks use a single tube design and are often chosen for consistent damping under repeated hits. On a lifted truck, shock length and mount angle matter, so a monotube shock should be checked for clearance at full extension and full compression after the lift is in.
Rear lift blocks and U-bolts carry the axle position, so the U-bolts should be checked regularly and retightened after the first few drives. Look for gaps at the block, shifting in the leaf springs or a clunk when moving between drive and reverse.
A knuckle suspension lift changes front steering geometry, so tire wear should be watched closely. Uneven wear on the inside edges can signal alignment issues. Pair the new suspension with a shop alignment to keep steering stable at highway speeds.
Specifications
| Brand | Fabtech |
|---|---|
| Part number | K1084M |
| UPC | 700007232921 |
| Lift height | 6 inches (range 5 to 6.99 inches) |
| Suspension type | Knuckle |
| Rear lift method | Lift blocks and U-bolts |
| Shocks | Stealth monotube shocks, included |
| Suspension requirement | Factory aluminum suspension |
Vehicle fitment
It fits the 2014–2015 and 2017–2018 Chevrolet Silverado 1500 and the 2014–2015 and 2017–2018 GMC Sierra 1500.
It is for trucks with factory aluminum suspension. The 2016 model year falls outside the coverage. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the factory suspension is the aluminum type before the kit is fitted, since the kit is made only for that type. Check the ride height after installation.
What’s included
The Gen II basic system with Stealth monotube shocks and the rear lift blocks with U-bolts.









