Overview
The Fabtech K1150M is a 6-inch basic lift with Stealth rear shocks for the 2019 and 2021 Chevrolet Silverado 1500 and GMC Sierra 1500. It fits 2WD versions of these trucks, and the lift range is 6 to 7 inches. It is the Stealth-shock version of the K1150, with the same suspension changes and a different rear shock.
The factory coilovers are moved from the bottom of the suspension so the front can turn fully at 6 inches of lift. The independent front suspension has zero bump steer through the full suspension cycle, and the steering knuckle geometry gives a tight lock-to-lock turn. The rear is lifted with a 5-inch block and U-bolt system. The kit carries a 5-year, 60,000-mile powertrain warranty.
Key features
- Stealth rear shocks
- Factory coilovers relocated to allow full steering
- Zero bump steer through the suspension cycle
- Near-stock track width keeps the tires under the fenders
- Steering knuckle geometry for a tight lock-to-lock turning radius
Steering and alignment after a lift
Raising a truck changes how the steering and suspension geometry work together, so the setup is more than adding height. Relocated coilovers and new knuckle angles alter caster and toe, which is why a full four-wheel alignment should follow any lift of this kind. Ask the installer to check steering stops and brake line length as well, since the wheels move through a different arc.
Rear shocks deserve attention too. A Stealth shock sized for the new rear height keeps the axle controlled on washboard and rough trails, but worn bushings or leaf hangers can undo that work. Inspect the shock mounts, U-bolts and bushings at regular intervals, and retighten fasteners after the first few drives.
- Check steering stops for clearance after installation
- Recheck U-bolt torque after the first trail runs
- Look for uneven tire wear, which can signal alignment drift
Specifications
| Brand | Fabtech |
|---|---|
| Part number | K1150M |
| Shock series | Stealth |
| Lift height range | 6 to 7 inches |
| Rear lift component | 5-inch block and U-bolt |
| Rear shocks | Stealth shocks |
| Front shocks | Factory coilovers, relocated |
| Drive type | 2WD |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2019 and 2021 Chevrolet Silverado 1500 in the Custom, Custom Trail Boss, High Country, LT, LT Trail Boss, LTZ, RST, SSV and WT trims, and the 2019 and 2021 GMC Sierra 1500 in the AT4, Base, Denali, Elevation, SLE and SLT trims.
The list does not cover the 2020 model year or the 2022 trucks. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Relocating the factory coilovers changes the suspension geometry, so have the alignment checked after installation. The driveline angles should also be checked, because the lift changes the ride height.
What’s included
Relocation hardware for the factory coilovers, the steering knuckles and crossmembers, Stealth rear shocks, and the rear 5-inch block and U-bolt system.
The kit includes a 5-year, 60,000-mile powertrain warranty.









