Overview
The Fabtech K1007 is a 6-inch performance system for the 2000–2006 Chevrolet Suburban 1500, the 2000–2006 Chevrolet Tahoe, the 2002–2006 Chevrolet Avalanche 1500 and the 2000–2006 GMC Yukon XL 1500. It combines Fabtech’s crossmember and steering knuckle system at the front with extended length coil springs at the rear.
The front allows the use of stock tires and wheels, and no driveshaft change is needed on AutoTrac models. The kit works with standard, load leveling and AutoRide shocks, and the increased caster helps control oversized tires. Front performance shocks are included, and the tire fit is 305/70R16 on 16×8 wheels with a 4 5/8-inch backspacing.
Key features
- 6-inch lift height
- Crossmember and steering knuckle system
- High arch 1/4-inch thick crossmembers
- 1/4-inch thick steel differential skid plate
- Tubular impact struts
- Extended length rear coil springs
Stock tires and trail use
Keeping stock tires and wheels is a real advantage of this type of lift, but the tire fit still needs checking against the wheel backspacing and fender clearance. Oversized tires on a lifted truck put extra load on axle joints, bushings and steering parts, so the tire choice affects how long the new parts last.
On trail use, the rear is lifted by longer coil springs and a trac bar drop bracket, so the rear axle moves through a different arc. Extended sway bar end links at the rear need a check once the suspension has settled. Shock travel is worth reviewing too, since the front shocks see new angles over rough ground.
- Recheck the trac bar bracket bolts after the first trail runs
- Inspect the extended end links for wear
- Confirm tire rubbing at full turn
Specifications
| Brand | Fabtech |
|---|---|
| Part number | K1007 |
| UPC | 70000212317 |
| Lift height | 6 inches (range 5 to 6.99 inches) |
| Suspension type | Knuckle |
| Rear lift method | Coil springs |
| Shock compatibility | Standard, load leveling and AutoRide shocks |
| Tire and wheel fit | 305/70R16 on 16×8 with 4 5/8-inch backspacing, minor trimming |
| Shocks | Front performance shocks included |
Vehicle fitment
It fits the 2002–2006 Chevrolet Avalanche 1500, the 2000–2006 Chevrolet Suburban 1500, the 2000–2006 Chevrolet Tahoe and the 2000–2006 GMC Yukon XL 1500.
It does not fit 2500 models or 2007 and later models. Standard length GMC Yukon fitment is not covered here, so confirm your vehicle’s year, model and trim before ordering.
Installation notes
The front works with the factory driveshaft on AutoTrac models. The rear is lifted by the longer coil springs and a trac bar drop bracket. The extended rear sway bar end links mean the sway bar geometry should be checked after installation.
What’s included
Front crossmembers and steering knuckles, tubular impact struts, a differential skid plate and relocation bracket, billet sway bar end links, extended length rear coil springs, a trac bar drop bracket, shock mount relocation brackets, extended rear sway bar end links and front performance shocks.









