Overview
The Fabtech K1083 is a 6-inch Basic GEN II lift kit with rear performance twin tube shocks for 2014 to 2015 and 2017 to 2018 Chevrolet Silverado 1500 and GMC Sierra 1500 trucks. It has a lift height range of 6 to 7 inches.
The Gen II design keeps the factory track width, so the tires stay under the fenders. The front sway bar keeps its stock end links and mounting holes, which preserves its leverage. No CV spacers, impact struts or add-a-leafs are needed, and the upper coilover spacer lifts from the top of the shock to shorten installation.
Key features
- 6-inch Basic GEN II design
- Factory track width retained
- Upper coilover spacer that lifts from the top of the shock
- Rear performance twin tube shocks
- Front differential relocated to reduce vibration at higher four-wheel-drive speeds
- All brackets and the skid plate in 1/4-inch steel
- Passes FMVSS 126 stability control standards, as tested by an independent lab.
Stability control and suspension
Lift kits change ride height, center of gravity and suspension geometry, and stability control systems rely on those inputs. Tires, wheel sizes and suspension changes all shift how the system reads the truck. Keep the tire size within the intended range, and avoid mixing wheel sizes or tire types on the same axle.
After the lift is in, have the stability control and traction warning lights checked during a short test drive. Warning lights that appear after alignment often point to a sensor or wiring problem rather than a suspension fault. Keep the wheel speed sensors clean and check their wiring at routine service.
Rear performance twin tube shocks control the rear of the truck, while the front keeps its factory setup. Replace worn front shocks as a pair so the truck handles evenly. Track the condition of the relocated differential mounts and the 1/4-inch steel brackets, since they affect steering stability.
- Check wheel speed sensor wiring after the lift
- Keep tire pressures even side to side
- Recheck alignment after any suspension change
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FABK1083 |
| Lift height range | 6 to 7 inches |
| Rear shocks | Performance twin tube |
| Brackets and skid plate | 1/4-inch steel |
| Stability control | Passes FMVSS 126 stability control standards. |
| Tire options | 35/12.50R17 on 17×8, 325/65R18 on 18×9, 35/12.50R20 on 20×9; all with 5-inch backspacing and minor trimming |
| Fitment type | Direct fit |
Vehicle fitment
It fits 2014 to 2015 and 2017 to 2018 Chevrolet Silverado 1500 models in the Custom, High Country, LS, LT, LTZ, SSV and WT versions, and GMC Sierra 1500 models in the Base, Denali, SLE and SLT versions.
2016 models are not covered. Confirm your vehicle’s year, model and trim before ordering. The tire options carry a minor trimming note.
Installation notes
Relocating the front differential and fitting the upper coilover spacers changes front geometry, so a wheel alignment and a driveline angle check belong after installation. The factory front sway bar end links are reused, so they should be checked for length once the lift is in.
What’s included
The kit includes the upper coilover spacers, the 1/4-inch steel brackets, the skid plate and the rear performance twin tube shocks.









