Overview
The Fabtech K20171 is an 8-inch 4-link lift for the 2005–2007 Ford F-250 Super Duty. It is the top model in Fabtech’s Super Duty line, and it uses upper and lower link arms with coil springs in the front and an add-a-leaf with a block and U-bolt kit in the rear.
The 4-link system is built for articulation and wheel travel. Its 2-inch OD heavy wall links use 1-inch race style Uniballs, and 1/4-inch steel brackets attach the links to the frame without cutting or welding. The kit is for non-dually models only.
Key features
- 8-inch lift height
- 2-inch OD heavy wall links
- 1-inch race style Uniballs
- 1/4-inch steel frame brackets
- Replacement coil springs for the front
- Billet sway bar links and trac bar relocation bracket
Articulation and steering geometry
A 4-link system controls axle position through four links, so the front and rear articulation depends on the health of the joints at each end. Heavy wall links and steel brackets carry the load, but the Uniballs are the parts that wear first when driven hard. Keep the joints greased and inspect them after off road use for play, torn boots and dirt contamination.
Larger tires on a lifted 4-link truck put more stress on the steering and sway bar components, so the pitman arm, relocation bracket and drop brackets should be checked for correct alignment after installation. Alignment should be set once the truck is at its final height. A caster and toe check helps confirm the setup before highway use.
- Grease the Uniballs and link ends on a regular schedule
- Check sway bar drop brackets for tightness
- Re-align the front end after the final height is set
Specifications
| Brand | Fabtech |
|---|---|
| Part number | K20171 |
| UPC | 70000583487 |
| Lift height | 8 inches (range 7 inches and up) |
| Suspension type | 4-link |
| Front lift | Upper and lower link arms with coil springs |
| Rear lift | Lift block, U-bolts and add-a-leaf |
| Shocks | Performance shocks included |
| Tire size | 37/13.50R20 with 20×10 wheels, 4 1/2-inch backspacing, minor trimming |
| Applies to | Non-dually models only |
Vehicle fitment
It fits the 2005–2007 Ford F-250 Super Duty.
It is for the F-250 Super Duty only, and dually models are not covered. Model years outside 2005–2007 are not covered. Match your truck’s year, model and dually status before ordering.
Installation notes
The kit includes a pitman arm, trac bar relocation bracket and sway bar drop brackets, so the steering and sway bar components change at installation. Minor trimming may be needed with the 37/13.50R20 tires on 20×10 wheels.
What’s included
Replacement coil springs for the front, the 4-link arms and brackets, an add-a-leaf with a block and U-bolt kit for the rear, billet sway bar links, sway bar drop brackets, bump stop extensions, a trac bar relocation bracket, a pitman arm and performance shocks.









