Overview
The Dana Spicer 2020936 is a 5.38 ratio Value Line ring and pinion for the Dana 50 front axle. It is an aftermarket gear set from the Value Line range, built for all-makes coverage across automotive and commercial applications.
At 5.38, this ratio gives more torque multiplication at the wheels than a 4.30 or 4.56 set. Confirm the axle and carrier before ordering, since a higher ratio changes how the gears load.
Key features
- 5.38 ratio front ring and pinion
- Dana 50 front axle type
- Dana Spicer Value Line aftermarket range
- All-makes coverage described by Dana Spicer
- Popular Dana axle manufacturer
Setting up a 5.38 gear set
Gear sets like this one work as a pair. The ring gear and pinion are matched by tooth pattern, so the carrier, pinion depth and bearing preload need to be set together. Once the gears are installed, a driveline shop usually checks backlash and tooth contact before the axle returns to service. Skipping that step is a common cause of noise and early wear in a new set.
Higher ratios change how the axle works. Engine speed at a given road speed goes up, so the drivetrain runs faster and the gears see different loads on climbs. Tire diameter also changes the effective ratio, so a tire size change may need a speedometer check. Keep the front differential fluid at the correct level and change it on the schedule your vehicle requires.
- Check the carrier and bearings for wear when the axle is opened
- Use the lubricant type your axle requires
- Watch for whine under load or on deceleration
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 2020936 |
| Gear ratio | 5.38 |
| Axle location | Front |
| Axle type | Dana 50 |
| Popular axle manufacturer | Dana |
| Range | Value Line |
Vehicle fitment
Confirm the axle type and gear ratio match your housing before ordering.
The Dana 50 is a separate axle from the Dana 60 and the Dana 30 layouts, so confirm the axle name on the housing. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Pinion depth, backlash and bearing preload should be set by a driveline shop for this 5.38 Dana 50 gear set, followed by a break-in period.
What’s included
A 5.38 ring and pinion set for the Dana 50. Check the package contents against your installation before starting, including the carrier and hardware.













