Overview
The Dana Spicer 80754 is a Trac-Loc limited slip assembly for Chrysler 9.25 inch rear axles with 31 splines. It uses a replaceable clutch pack to add off-road traction while keeping the drive smooth on pavement.
The unit uses a replaceable clutch pack to prevent wheel slippage, which Dana Spicer says increases traction. It is intended for C clip axles and works with all gears.
Key features
- Trac-Loc limited slip design
- Replaceable clutch pack
- Smooth street operation alongside off-road traction
- For use with all gears
- For 31 spline axles and C clip axles
- Chrysler 9.25 inch rear axle application
Clutch pack care
The clutch pack is what gives a limited slip its character, and it wears with use. Clutch packs that are worn lose their grip, so one wheel can spin on a loose surface while the other gets little power. Replacing the clutch pack is the normal service when this happens, and it is worth checking whenever the axle is opened.
Limited slip units rely on the gear oil for correct clutch action. Plain gear oil without the required friction modifier can cause chatter when turning under power. Changing the fluid at the interval set in your axle service schedule helps keep the clutch pack working as intended.
- Use gear oil with the friction modifier the clutch requires
- Watch for chatter or a clunk when turning under power
- Inspect the clutch pack whenever the axle is opened
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 80754 |
| UPC | 23913131456 |
| Axle application | Chrysler 9.25 inch rear |
| Axle location | Rear |
| Spline count | 31 splines |
| Axle retention | C clip axles |
| Differential type | Limited slip assembly |
| Gear compatibility | All gears |
| Clutch | Replaceable clutch pack |
Vehicle fitment
It is sized for the Chrysler 9.25 inch rear axle. Match the axle identification and 31 spline count to your housing, and check your year, model and trim against your vehicle before buying.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Fitting a limited slip changes the gear setup, so have a professional check ring gear backlash and bearing preload after the unit is installed. Count the axle’s splines, which should be 31, before fitting.
What’s included
One Dana Spicer 80754 limited slip assembly. Not included: ring gear, axle shafts and carrier case, which are not part of this unit.









