Overview
The Dana Spicer 706040X is an open differential carrier case for Dana 60 rear axles, supplied empty with no gears. It suits a change to a carrier with a different ring gear landing, or a replacement for a worn or broken carrier when the spider gears can be kept.
The axle type is Dana 60, the location is rear, and the differential type is open differential case only. It is universal fit, so match the housing and ring gear landing before fitting.
Key features
- Open differential case only, with an empty spline
- Built for rear Dana 60 axles
- Suited to a different ring gear landing
- Dana Spicer O.E. carrier case
Open case rebuild tips
An open differential sends torque to whichever wheel has the least grip, which is why it suits street use and light trail work. When a case is replaced, the spider gears and side gears can often be reused if they show only light wear. Inspect the teeth for pitting and chipping, and check that the thrust washers move freely without scoring.
The new case also needs correct backlash between the ring gear and pinion, which is set with shims and carrier bearing preload. Measure the setup carefully rather than relying on feel, because incorrect contact patterns wear teeth quickly. A professional with the right gauges is the usual choice for this step, and the axle should be tested under light load before regular driving.
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 706040X |
| UPC | 725975978313 |
| Axle type | Dana 60 |
| Axle location | Rear |
| Axle spline | Empty case |
| Differential type | Open differential case only |
Vehicle fitment
This carrier case is not vehicle-specific. It is universal fit for the Dana 60 rear axle, so check the housing before fitting.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Without a ring gear, pinion or bearings in the case, those parts must be fitted and set up separately, and a professional should set the gear mesh.
What’s included
The empty open differential carrier case only.
Not included: ring gear, pinion and bearings.









