Overview
The Dana Spicer 44590 is a bare, empty open differential carrier case for Model 35 rear axles. It is an O.E. style carrier used when a broken or worn case needs replacing, or when a gear change requires a different ring gear landing. It suits ABS and non-ABS axles.
Key features
- Replacement open differential case for the Dana 35 rear axle
- Bare case with no gears included
- Listed ratios include 3.55, 3.73 and 4.11
- Suited to ABS and non-ABS axles
Matching the carrier to your axle
A bare carrier is only useful when the gears, shims and bearings are chosen to match it. Pinion depth and bearing preload are set with shims, and a carrier that changes the gear landing will need those measurements redone. Checking the bolt length and housing bores before ordering prevents the case from fitting badly.
Dana 35 housings can wear at the bearing bores and the bolt holes, especially on trucks that have seen heavy loads. Cracks around the bores, a bent case or whining gears all point to a carrier that needs inspection. Clean the mating surfaces thoroughly before installing the new case.
- Measure pinion depth with the new carrier
- Replace shims as the gear set requires
- Inspect housing bores for cracks or wear
Specifications
| Brand | Dana Spicer |
|---|---|
| Product number | 44590 |
| UPC | 23913131555 |
| Axle | Dana 35 rear axle (Model 35) |
| Case type | Open differential case, bare and empty |
| Ratios listed | 3.55, 3.73, 4.11 |
| Bolt length | .81 in |
| Axle compatibility | ABS and non-ABS axles |
Vehicle fitment
The case is for the Dana 35 rear axle (Model 35), so check the axle housing and bolt length before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Swapping in a new carrier changes ring and pinion setup, so have a qualified axle shop check gear mesh and bearing preload.
What’s included
The case is bare and empty. Not included: Ring gear, pinion and spider gears must be sourced separately.












