Overview
The Dana Spicer Dana 44 Open Differential Carrier Case, part 32684, is an empty carrier case for an open Dana 44 differential. It is for 3.92 and up gear sets.
Dana Spicer offers the case for gear changes that need a carrier with a different ring gear landing, or for replacing a worn or broken carrier. The spider gears are not part of the case.
Key features
- Empty open differential case
- For 3.92 and up gears
- Front or rear axle position listed
Carrier case replacement checks
A carrier case holds the spider gears, side gears and the ring gear. When the case cracks, wears at the bearing bores or loses its alignment, the gear mesh shifts and noise or early failure follows. Inspect the case for cracks around the ring gear bolt holes before reusing it.
Ring gear setup affects the case as much as the gears. Ring gear runout and bearing preload must be checked after any carrier swap, and the new case must match the gear ratio you are running. Clean the bearing bores and the ring gear mounting face before bolting anything together. Keep track of the shims and bearing caps during removal so they go back in the same positions. Replace the bearings if they show pitting or heat discoloration.
- Inspect the bearing bores for wear
- Check ring gear runout before final assembly
- Mark bearing caps to keep their positions
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 32684 |
| UPC | 23913138219 |
| Axle location | Front or rear |
| Axle type | Dana 44 |
| Differential type | Open differential case only, empty |
| Gear ratio | 3.92 and up |
Vehicle fitment
Universal fit is listed, but no vehicle is named. The case is for Dana 44 open carriers, so confirm the axle type and the 3.92 and up gear requirement before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The empty open differential case.
Not included: spider gears, side gears and internal parts.












