Overview
The Dana Spicer Dana 44 E-Locker, part 2007503, is a complete O.E. differential carrier assembly for the front axle. It is meant to replace a broken or worn carrier, and it has an automatic locker.
All components are brand new and built to factory specifications. The axle type is Dana 44 JK with 32 splines.
Key features
- Complete carrier assembly
- Automatic locker
- 32 spline
- Front axle position
- Brand new components
Carrier replacement basics
A carrier assembly holds the differential, gears and locker in one unit, so replacing it swaps a large part of the drivetrain at once. Compare the ring gear, pinion and locker type with the old unit before fitting. Matching the spline count and axle family is the first check.
Setting up a complete carrier involves gear mesh, pinion depth and bearing preload, and these settings decide how quiet and durable the gears will be. Work with a shop that has the proper setup tools if you are not experienced with carriers. Replace the axle seals and check the fluid level once the carrier is installed and the unit has been run in.
- Confirm axle family and spline count
- Check locker engagement after installation
- Set bearing preload to the procedure
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 2007503 |
| Axle location | Front |
| Axle type | Dana 44 JK |
| Axle spline | 32 |
| Differential type | Automatic locker |
| Manufacturer | Dana |
Vehicle fitment
No vehicle is named, and the axle type is written as Dana 44 JK. Confirm the front carrier and the 32 spline count against your axle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A complete carrier is a larger job than a part swap: the gear set must be set up and the carrier installed with the correct preload. Professional setup is recommended.
What’s included
A complete front differential carrier assembly with automatic locker.








