Overview
The Crown Automotive J8124799 is a passenger-side rear wheel cylinder for 11 inch x 2 inch brakes with a 15/16 inch inside diameter. It fits the 1972–1975 CJ5 and CJ6, the Wagoneer and several J-series trucks.
The bore size and brake size must both match, so measure before choosing.
Key features
- Rear passenger-side wheel cylinder
- For 11 inch x 2 inch brakes
- 15/16 inch inside diameter
- Direct-fit application
Before replacing the cylinder
A rear wheel cylinder pushes the brake shoes outward when you press the pedal, and it is one of the parts that leaks fluid as a drum brake ages. Before buying a replacement, pull the drum and look at the shoes. Fluid on the inside of a shoe or the backing plate usually points to a leaking cylinder, and shoes soaked with fluid should be replaced at the same time.
Bore size and piston fit matter as much as the brake size. Measure the inside diameter of the old cylinder and compare it with the part you plan to fit. A cylinder that is close but not matched can push the shoes unevenly or leak at the seals. Clean the backing plate and check the brake line fittings while the drum is off.
- Check both rear cylinders, since wear is usually similar on each side
- Replace the rubber dust boots when the cylinder is out
- Bleed the brakes after any cylinder is changed
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J8124799 |
| UPC | 848399067712 |
| Product type | Drum brake wheel cylinder |
| Position | Rear, passenger side |
| Brake size | 11 inch x 2 inch |
| Inside diameter | 15/16 inch |
| Fit type | Direct fit |
Vehicle fitment
The J8124799 fits the 1972–1975 Jeep CJ5 and CJ6, the 1971–1973 J-100, J-2500, J-2600, J-4500, J-4600, J-4700, J-4800 and Wagoneer, and the 1971 J-3800.
CJ5 and CJ6 models before 1972 are not on this list. Confirm your vehicle’s year, model and trim before ordering.









