Overview
The Crown Automotive J8126766 is a driver-side front wheel cylinder for 11 inch brakes. It fits the 1965–1977 CJ5, the 1965–1975 CJ6 and the CJ5A, plus a range of J-series trucks from 1963 to 1973.
It is a single cylinder for the left front wheel.
Key features
- Front driver-side wheel cylinder
- For 11 inch brakes
- Broad CJ and J-series application list
Choosing a drum wheel cylinder
A wheel cylinder sits at the top of each drum brake shoe and pushes the shoes outward when you press the pedal. Its job is simple, but it works hard. Each stop sends hydraulic pressure through the piston cups, so small leaks show up quickly as fluid on the inside of the drum or backing plate. On an older Jeep, a cylinder that has sat for years can also seize or pit, which causes uneven braking.
When choosing a replacement, match the brake size and the side first, then check that the bore and mounting holes line up with the old unit. Shoes and drums are usually worn at the same time, so inspect them while the drum is off. Replacing a cylinder alone on badly worn shoes rarely restores full braking.
- Check the side before ordering
- Inspect the drum and shoes when the cylinder is replaced
- Bleed the system after installation
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J8126766 |
| UPC | 848399068702 |
| Product type | Drum brake wheel cylinder |
| Position | Front, driver side |
| Brake size | 11 inch |
| Fit type | Direct fit |
Vehicle fitment
It is a direct fit for the 1965–1977 Jeep CJ5, the 1966–1968 CJ5A, the 1965–1975 CJ6, the 1963–1973 J-100, and the J-200 to J-330, J-2500 to J-2800, J-3500 to J-3800 and J-4500 to J-4800 trucks, for the years shown for each. The CJ7 is not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
The CJ7 is not on this list. Confirm your vehicle’s year, model and trim before ordering.









