Overview
The Bushwacker Cut-Out Style front fender flare pair, part 20001-07, is made for the Ford Bronco. Each Cut-Out set is individually designed to maximize off-road wheel travel and maintain tire coverage. This pair adds 1.5 inches of width and tire coverage at the front and fits the 1966 to 1977 Ford Bronco and the 1975 to 1977 Bronco Sport.
Cut-Out flares require cutting body sheet metal to achieve maximum articulation and coverage for oversized tires, which Bushwacker says is what gives the set its extreme off-road performance. The flares are made from thick, warp-proof Dura-Flex 2000 TPO, engineered for durability in severe conditions. The UV protection guards against chalking, and the pro-grade matte black finish can be left as is or custom painted.
Key features
- Individually designed for the Ford Bronco
- 1.5 inches of width and tire coverage at the front
- Sheet metal removal maximizes wheel articulation
- Stainless steel hardware for an easier bolt-on installation
- 100% UV protected Dura-Flex 2000 TPO that guards against chalking
- OEM matte black finish that can be custom painted
Front clearance and steering
Front fender flares sit close to the steering knuckles, tie rods and front tires. When the front tires are turned hard, the flare edge can contact them even when the static gap looks fine. Test steering through its full range after mounting, and watch for contact with the tire sidewall or the inner edge of the flare.
A front pair also changes how mud and water move through the wheel well. Keep the inner splash area clear so debris cannot pack against steering components. Inspect the flare brackets after rough trail use, since front brackets carry load when tires hit obstacles.
- Check clearance at full left and right lock
- Keep the inner wheel well free of packed mud
- Inspect front brackets after rough trail runs
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 20001-07 |
| UPC | 90689100061 |
| Position | Front |
| Quantity | Pair |
| Width and coverage | 1.5 inches |
| Material | Dura-Flex 2000 TPO |
| Finish | OEM matte black, paintable |
| Rear pair part number | 20002-07 |
| Extra large rear pair part number | 20005-07 |
Vehicle fitment
It fits the 1966 to 1977 Ford Bronco, including the Base, Custom, Northland, Ranger, Roadster and Wagon models in those years, and the 1975 to 1977 Bronco Sport.
The list covers the first-generation Bronco years only, so the 1992 to 1996 Bronco and later models are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Cut-Out flares require cutting body sheet metal at the front wheel openings, so this is not a bolt-on-only install. Follow the installation guide for your Bronco, and check the front clearance at full steering lock once the pair is mounted.
What’s included
A pair of front Cut-Out flares. The rear pair is part 20002-07, and the extra large Cut-Out rear pair is part 20005-07.
















