Overview
The Bushwacker Flat Style rear fender flare pair, part 10064-07, is made for the rear of the Jeep Cherokee XJ. The flares add up to 3.25 inches of tire coverage from debris and maximize wheel articulation for severe off-road use. The pair fits the 1984 to 2001 Jeep Cherokee XJ.
The flares are molded from Dura-Flex 2000 TPO and engineered to install with a minimum of extra tools and bodywork. The mounting brackets bolt straight onto the vehicle. The material is UV protected to stop chalking, which helps the OEM textured black finish keep its look. The flares are made in the USA and carry an OE-style finish.
Key features
- Flat style profile for the rear of the Cherokee XJ
- Adds up to 3.25 inches of tire coverage from debris
- Installs with minimal drilling or cutting
- Mounting brackets bolt onto the vehicle for a simpler fit
- UV protected Dura-Flex 2000 TPO
- OEM textured black finish with an OE-quality style
Rear clearance and suspension travel
Rear flares are judged by how the tire behaves at the top of its travel. As the axle moves on rough ground, the tire rises into the flare, so the gap should be checked with the vehicle loaded and at full compression as well as at rest.
Shock absorbers, springs and bump stops all change the space above the tire. A worn or upgraded suspension may shift the tire position, so a flare that cleared when new may need a second look. Confirm clearance at the tire after any change.
Look after the rear pair with simple habits. Rinse off mud after trail use, check the bracket bolts for tightness, and watch for hairline cracks around the mounting points. Early attention keeps the flares sitting square and protects the finish.
- Check clearance loaded and at full compression
- Recheck after suspension changes
- Inspect bracket bolts for tightness
- Watch mounting points for hairline cracks
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 10064-07 |
| UPC | 90689112729 |
| Position | Rear |
| Quantity | Pair |
| Tire coverage | Up to 3.25 inches from debris |
| Material | Dura-Flex 2000 TPO |
| Finish | OEM textured black |
| Front part number | 10063-07 |
| Set part number | 10922-07 |
Vehicle fitment
It fits the 1984 to 2001 Jeep Cherokee (XJ), including the Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE and Sport models in those years.
The list covers the Cherokee XJ only, so the Grand Cherokee, the Liberty and the Wrangler are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The rear pair installs with minimal drilling or cutting, so most of the work is fitting the brackets and checking the rear clearance. Confirm that the pair clears the tires at full suspension travel after mounting.
What’s included
A pair of rear Flat Style flares. The front pair is part 10063-07, and the full set part number is 10922-07.









