Overview
The Baer Brakes 6920264 is a right-side, two-piece vented replacement brake rotor with a 14 inch outside diameter and a 1.25 inch nominal thickness. Its slotted, drilled and zinc-plated cast iron face carries 12 mounting bolt holes on an 8.5 inch bolt circle, and it is used in the Baer EXT+ system and select other Baer brake systems.
The rotor is directional and built for the right side of the vehicle only, so the left-side version is a separate purchase. It is a performance-grade replacement for owners running a Baer brake kit. Match the Baer system and bolt pattern to your setup before you choose it.
Key features
- Purpose-built castings from premium materials
- Curved vanes intended to improve cooling
- Designed for rotor stability and resistance against distortion
- Dynamically balanced to reduce vibration
- Slotted, drilled and zinc-plated finish
- Directional brake surface for the right side
- Vented, two-piece cast iron construction
Slotted and drilled rotors
Slots and drilled holes are cut into the friction face to vent gas and water and to keep the pad surface clean. Under heavy braking, the slot edges can wear pads faster than a plain face, so pad choice matters. Drilled holes also concentrate stress, which is why the area around them should be inspected regularly for hairline cracks.
Choosing a slotted or drilled rotor for a daily-driven vehicle usually means accepting a bit more pad wear and some brake noise while new pads settle. Rotors of this type are often paired with pads rated for that use, and both sides of an axle should be replaced together so they brake evenly. Keep the slots clear of road grit and check them whenever the wheels are off.
- Look for cracks radiating from the drilled holes
- Check that pads are rated for slotted rotors
- Replace both sides of an axle together
- Inspect the friction face for a lip at the outer edge
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6920264 |
| UPC | 844165012313 |
| Axle side | Right |
| Construction | Two piece |
| Rotor type | Vented |
| Brake surface | Directional |
| Material | Cast iron |
| Surface type | Slotted, drilled and zinc plated |
| Outside diameter | 14 in |
| Nominal thickness | 1.25 in |
| Mounting bolt holes | 12 |
| Mounting bolt hole circle diameter | 8.5 in |
| Grade type | Performance |
| ABS tone ring included | No |
| Emission code | 6 |
| Sold as | Each |
| Country of origin | CN |
Vehicle fitment
Confirm your vehicle’s year, model and trim before ordering. Measure your current rotor’s outside diameter and bolt pattern, since a 14 inch rotor will not suit every Baer setup.
Installation notes
Confirm the right side before mounting because the rotor is directional. Check the 1.25 inch thickness and 14 inch diameter against your caliper clearance and hub before assembly, and have a qualified brake technician verify the installation.
What’s included
One right-side rotor, sold as each.
Not included: the left-side rotor and any ABS tone ring, since no ABS tone ring comes with this part.













