Overview
The Baer Brakes Big Claw HD rear disc brake rotor set, part number 2262033-2, is a larger-diameter upgrade for the rear axle of 2013–2022 Ford F-250 and F-350 Super Duty trucks with 4WD and a single rear wheel. The set includes two purpose-cast, drum-in-hat rotors and two new caliper relocation brackets that move the calipers outward so the bigger rotors clear while the OE pads and hardware still fit.
Baer reports up to a 49 percent gain in braking effectiveness and as much as a 200-degree reduction in rotor temperatures versus OE in extreme conditions, based on independent third-party testing. Baer attributes these results to the added brake torque and leverage of the larger diameter, plus the curved vane design. Because wheel designs vary, Baer advises checking wheel clearance with its template before installing.
Key features
- Rotors up to 2 inches larger than stock diameter on some applications, for greater brake torque and leverage
- One-piece, full cast rotor with curved directional vanes that act like a centrifugal pump to move air and improve cooling
- Slotted friction surface helps vent dust and gases for a more consistent pedal feel
- New OE-style caliper relocation brackets keep OE pad and hardware compatibility
- Zinc-plated finish resists rust and corrosion
- Direct bolt-on system with no brake bleeding required
Before you buy
Rear rotors on a heavy-duty Super Duty do more work than they seem, since the rear axle carries a large share of the load when towing or hauling. A larger-diameter rotor gives the pads more swept area and leverage, but the bigger disc also changes how far the caliper must reach and how much clearance the wheel has, which is why the relocation brackets matter in this kit.
Before ordering, check the wheel’s backspacing and offset against the rotor hub face, and make sure the brake lines and pad wear sensors have enough slack for the moved calipers. Pads often wear faster on a larger rotor when the brakes are used hard on long descents, so plan pad replacement alongside the rotors.
- Inspect rotor hat surfaces for cracks after the first few hard stops
- Re-torque wheel lugs after the first trail runs
- Replace rotors when wear reaches the discard thickness
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 2262033-2 |
| UPC | 90127969960 |
| Sold as | Set |
| Country of origin | USA |
| Axle | Rear |
| Drive | 4WD |
| Applications | Ford F-250/350 13-22 |
| Rotor type | Drum-in-hat |
| Surface type | Slotted |
| Brake surface | Directional |
| Vent type | Vented, curved vanes |
| Material | Cast iron |
| Finish | Zinc plated |
| Construction | One piece, full cast |
| Outside diameter | 15 |
| Inside diameter | 9.059 |
| Center hole diameter | 4.999 |
| Nominal thickness | 1.496 |
| Discard thickness | 1.417 |
| Overall height | 4.968 |
| Mounting bolt hole quantity | 8 |
| Mounting bolt hole circle diameter | 6.693 |
| Mounting bolt hole diameter | 0.637 |
| Floating | Yes |
| ABS tone ring included | No |
| Grade type | Performance |
| Template | Z316U |
| Warranty | Limited 1 Year Warranty |
Vehicle fitment
It fits 2013–2022 Ford F-250 Super Duty and 2013–2022 Ford F-350 Super Duty trucks. It is for the rear axle on 4WD trucks with a single rear wheel.
The set is made for rear-axle use on 2013–2022 Super Duty trucks. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation is direct bolt-on, so the brakes need no bleeding after the rotors and brackets are fitted. Compare the rotor with your wheel, including the spare tire wheel, using the Z316U template before mounting, since wheel styles vary and fit cannot be guaranteed in every wheel.
What’s included
A pair of rotors and a pair of new caliper relocation brackets.
Not included: Existing calipers, brake pads and pad hardware are not included. The kit keeps OE pads and hardware compatible.






















